Printable Version of Topic

Posted by: 87m491 Dec 4 2023, 08:11 AM

replacing some engine bay items and had a question on the large evap filter line that runs to the drivers front of the engine towards Cyl #2. Is the fitting pictured for the "x" hose or "y" hose or neither?
thx

Posted by: dr914@autoatlanta.com Dec 4 2023, 10:50 AM

blow source for the charcoal cannister

Posted by: 914werke Dec 4 2023, 10:53 AM

If you are running a line from the R. side impeller housing nipple to the Charc. canister you should cap that one.

Posted by: 87m491 Dec 4 2023, 04:26 PM

Thank you both. AFAIK, all the other vac lines are hooked up per the diagram. I had the line from the cannister just dropped through the engine tin in that area as that what I thought the diagram showed. I will connect it to the port in the picture and be good to good.
Thx