This looks like the fuel pump cover Eric talked about in the GT video he did with Ian. Looks bolt on. What does the prep look like under the cover? Has anyone does this yet?
https://www.restoration-design.eu/fuel-pump-clamp-bracket.html
Post #69 on my thread shows what I did for this mod. Really nice that Restoration Design are making these!
http://www.914world.com/bbs2/index.php?s=&showtopic=349463&view=findpost&p=2971172
Wow, that is nice you can buy the kit which includes the bracket and dampeners.
Agreed. Eric must have passed this on to them. Great team work, ideas and parts.
Thanks @http://www.914world.com/bbs2/index.php?showuser=12023 I will look at it.
This makes things SO much easier on a lot of levels
If you’re installing a front sway bar… the fuel pump installed in the front must fit just below it and it’s a tight fit. At least mine as. I originally had the old 3 Port…it was very tight. I’ve since updated to a 2 Port and it better.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)