Printable Version of Topic
914World.com _ 914World Garage _ No mod fire extinguisher mount group buy
Posted by: mb911 Jan 7 2024, 10:14 AM
My laser cuts will be done in about a week or 2 and wanted to offer them up here before going to my website. They will be on the website for $65 plus shipping. I will be offering these to the group for $45 plus shipping. They will all be powder painted flat black and come with hardware. You will likely have to drill the mount for your exact FE. I use a purple K thanks to Greg Coons suggestion years ago. This will fit all 914s with movable passenger seats. Zero mods required for the car and the parts are laser cut with no welds so look very clean.
PayPal or check are accepted. I would expect that shipping will be in the $15-$17 dollar range for most locations. If PayPal I will ask for the 3% fees.
You can email or PM for details
Or post here
Posted by: mzapisek Jan 7 2024, 12:16 PM
I have two of these installed. Great quality and really easy to install.
Posted by: orthobiz Jan 7 2024, 12:39 PM
I am in for one please...
Paul
Posted by: mb911 Jan 7 2024, 01:22 PM
QUOTE(orthobiz @ Jan 7 2024, 10:39 AM)
I am in for one please...
Paul
Sounds good
Posted by: Freezin 914 Jan 7 2024, 01:25 PM
I would do one for sure. If they will work in a 911, I would buy another one as well.
Posted by: Rufus Jan 7 2024, 01:46 PM
Ben, I’m in for one as well. Thanks, PM sent
Posted by: Cairo94507 Jan 7 2024, 01:51 PM
Yup; PM sent.
Posted by: mb911 Jan 7 2024, 02:07 PM
QUOTE(Freezin 914 @ Jan 7 2024, 11:25 AM)
I would do one for sure. If they will work in a 911, I would buy another one as well.
Sorry not on a 911
Posted by: mb911 Jan 7 2024, 02:09 PM
I won’t reply back to pms right away as I want to keep them new and unread until I have a bigger list made in a day or 2 then I will make sure you include all your contact information.
Posted by: GEB63 Jan 7 2024, 05:53 PM
Ben, I will take one as well. Thanks
Posted by: technicalninja Jan 7 2024, 06:35 PM
Count me in as well.
I was a huge believer in Halon.
Boy, those are expensive now!
A decent sized one is 500+ today.
They will put out the SUN!
I'll have to look closer at the Purple K stuff now.
Posted by: jdbogart@self-serv.net Jan 7 2024, 08:02 PM
QUOTE(mb911 @ Jan 7 2024, 03:09 PM)
I won’t reply back to pms right away as I want to keep them new and unread until I have a bigger list made in a day or 2 then I will make sure you include all your contact information.
I really like it, but it appears from your website the mount won't work on the passenger seat of a 1970 914, correct?
Don
Posted by: Bucci Jan 8 2024, 12:26 AM
Ben, I’ll take one please post description for payments.
Posted by: arbitrary Jan 8 2024, 12:55 AM
One please.
Posted by: mb911 Jan 8 2024, 05:06 AM
QUOTE(Bucci @ Jan 7 2024, 10:26 PM)
Ben, I’ll take one please post description for payments.
I don’t have a 70 to confirm with but I doubt it.
Posted by: Superhawk996 Jan 8 2024, 09:54 AM
Ben,
Sorry to be dense. When you say no mod, how are they mounting? Sharing bolts with seat adjust comb? Just clipping over the lateral box section in front of the seat?
I think I’m in for one but just want to understand how it mounts
Posted by: Steve Jan 8 2024, 10:49 AM
I will take one
Posted by: Montreal914 Jan 8 2024, 11:00 AM
QUOTE(Superhawk996 @ Jan 8 2024, 07:54 AM)
Ben,
Sorry to be dense. When you say no mod, how are they mounting? Sharing bolts with seat adjust comb? Just clipping over the lateral box section in front of the seat?
I think I’m in for one but just want to understand how it mounts
Same here…
Is it attached to the body or the seat (does it move or not)?
If attached to the body, what is the seat position in your picture, far back or set for a normal passenger height (what ever normal means…)?
Any option of getting it in satin black instead of flat black?
Thanks for making these!
Parallel topic, maybe group shipping to some of the SoCal folks? Just a thought…
Posted by: mb911 Jan 8 2024, 11:34 AM
QUOTE(Montreal914 @ Jan 8 2024, 09:00 AM)
QUOTE(Superhawk996 @ Jan 8 2024, 07:54 AM)
Ben,
Sorry to be dense. When you say no mod, how are they mounting? Sharing bolts with seat adjust comb? Just clipping over the lateral box section in front of the seat?
I think I’m in for one but just want to understand how it mounts
Same here…
Is it attached to the body or the seat (does it move or not)?
If attached to the body, what is the seat position in your picture, far back or set for a normal passenger height (what ever normal means…)?
Any option of getting it in satin black instead of flat black?
Thanks for making these!
Parallel topic, maybe group shipping to some of the SoCal folks? Just a thought…
Sorry flat black is it. No other options without making it expensive. These mount on the seat itself and sandwich mount-seat base material- large washer and then bolts through the whole assembly
Posted by: mb911 Jan 8 2024, 11:36 AM
I tested in my car for the last few years. It works perfect and doesn’t get in the way of my 8 year old or my 23 year old when they get in the car
Posted by: mb911 Jan 8 2024, 03:43 PM
Please PM with interest as well.
Posted by: mb911 Jan 8 2024, 04:46 PM
One member commented that possibly the fire extinguisher is to far away from the seat and the reason for this was to ensure it would fit multiple FEs if for some reason you want those trimmed before powder back by an inch or so please let me know by tomorrow afternoon. All get bent Wednesday morning
Posted by: Eric_Ciampa Jan 8 2024, 06:20 PM
Put me down for one.
Posted by: mb911 Jan 8 2024, 06:59 PM
QUOTE(Eric_Ciampa @ Jan 8 2024, 04:20 PM)
Put me down for one.
Ok
Posted by: Superhawk996 Jan 8 2024, 10:50 PM
I’m in
Posted by: mb911 Jan 9 2024, 06:15 AM
Sounds good everyone picking up laser cuts this morning
Posted by: dstudeba Jan 9 2024, 10:23 AM
Please add me, thanks!
Posted by: mb911 Jan 9 2024, 11:38 AM
Laser cuts have been picked up. Bending tomorrow then off to painter
Posted by: mb911 Jan 9 2024, 05:02 PM
Expecting to be shipping by next Tuesday/Wednesday
Posted by: jmalone Jan 9 2024, 06:22 PM
Ben, please put me on the list for one bracket. Thanks so much for making these.
Posted by: mb911 Jan 9 2024, 06:28 PM
QUOTE(jmalone @ Jan 9 2024, 04:22 PM)
Ben, please put me on the list for one bracket. Thanks so much for making these.
If you could drop a PM with all your details like email and shipping information and I can send PayPal invoices?
That goes for everyone. Ordered boxes this will move fast
Posted by: mb911 Jan 10 2024, 10:29 AM
All bent and headed to powder paint
Posted by: DRPHIL914 Jan 10 2024, 04:57 PM
interested as well, i just was out of town and not online much at all for the past week so i missed this when it was launched.
Please put me down for one i will PM you
Phil
Posted by: JamesM Jan 11 2024, 01:58 AM
Just saw this.
count me in!
perfect timing too as my car is just going back together and I have been looking for a better way to mount my extinguisher.
Posted by: JamesM Jan 11 2024, 02:00 AM
QUOTE(JamesM @ Jan 11 2024, 12:58 AM)
Just saw this.
count me in!
perfect timing too as my car is just going back together and I have been looking for a better way to mount my extinguisher.
actually strike that i guess. Just notices you are mounting to the seat itself and I wont be running stock seats. Im looking for something that possibly attaches to the stock rails but I wont have the stock seats.
Posted by: mb911 Jan 11 2024, 10:28 AM
QUOTE(JamesM @ Jan 11 2024, 12:00 AM)
QUOTE(JamesM @ Jan 11 2024, 12:58 AM)
Just saw this.
count me in!
perfect timing too as my car is just going back together and I have been looking for a better way to mount my extinguisher.
actually strike that i guess. Just notices you are mounting to the seat itself and I wont be running stock seats. Im looking for something that possibly attaches to the stock rails but I wont have the stock seats.
There really was not an easy way to do that without modifying the seat rails and that doesn’t work for the masses
Posted by: SirAndy Jan 11 2024, 10:55 AM
I'll take one!
Posted by: Gary Jan 11 2024, 03:06 PM
Want 1. Will PM.
Posted by: mb911 Jan 11 2024, 04:59 PM
Done. Gonna box tomorrow then we pm everyone or send PayPal invoices for those that sent me information
Posted by: mb911 Jan 11 2024, 08:22 PM
And installed
Posted by: 56kabrio Jan 11 2024, 09:05 PM
I’ll take one as well.
Thanks
Mack
Posted by: mb911 Jan 11 2024, 09:20 PM
QUOTE(56kabrio @ Jan 11 2024, 07:05 PM)
I’ll take one as well.
Thanks
Mack
Please send a pm with contact information. I will be sending invoices tomorrow
Posted by: mb911 Jan 12 2024, 07:57 AM
Posted by: Cairo94507 Jan 12 2024, 11:45 AM
Money sent.
Posted by: mb911 Jan 12 2024, 12:15 PM
Everyone that sent and email address except DRPHIL (your email is to long) has been sent an invoice. Everyone else got a PM with details on how to pay. Thanks for the support it allowed me to sell half of what I had made and that really allows me to continue to inventory products and make new products
Posted by: Superhawk996 Jan 12 2024, 01:26 PM
Thanks for making these Ben!
I always struggle with make vs buy. It’s always hard to beat the stuff you do.
By the time I get metal, cut, drill, de-burr, powder coat, and account for my time, etc., I think this was a great deal.
Posted by: mb911 Jan 12 2024, 02:15 PM
QUOTE(Superhawk996 @ Jan 12 2024, 11:26 AM)
Thanks for making these Ben!
I always struggle with make vs buy. It’s always hard to beat the stuff you do.
By the time I get metal, cut, drill, de-burr, powder coat, and account for my time, etc., I think this was a great deal.
That’s kind of how I view it as well. I was also able to supply everyone with a new stick perfect for your back window in the 914 or on your tool box. Shipping ended up being more than I hoped but still worked out ok. I charged 17 to everyone and averaged 23 but I am ok with it helping everyone out and still a few bucks left for me to buy 914 stuff
Posted by: JuniorVarsity Jan 14 2024, 06:31 PM
poop, just seeing this. Will take one if any left or another run is planned. Will PM my data just in case.
Posted by: mb911 Jan 14 2024, 07:12 PM
QUOTE(JuniorVarsity @ Jan 14 2024, 04:31 PM)
poop, just seeing this. Will take one if any left or another run is planned. Will PM my data just in case.
I have plenty left. And replied to your PM.
Posted by: simonjb Jan 14 2024, 07:30 PM
Yes please
Posted by: mb911 Jan 15 2024, 06:10 AM
Thanks everyone
Posted by: mb911 Jan 15 2024, 03:28 PM
Ok I think everything shipped that was paid for. Not bad. Only 3 people that said they wanted one that didn’t buy.
Posted by: mb911 Jan 16 2024, 06:46 PM
Everything has shipped that has been paid for. If anyone else wants one please let me know
Posted by: worn Jan 16 2024, 09:24 PM
QUOTE(mb911 @ Jan 12 2024, 06:57 AM)
I will attest to the very high quality with these. Simple shape as form follows function and that produces what we want. Fire extinguisher where you want it when you need it. Going into the ‘76.
Posted by: JmuRiz Jan 17 2024, 09:20 AM
If I ran stock seats I'd be all over this, but with my Koenig/Scheel seat I don't think it would work.
Posted by: Txbentleyboy Jan 17 2024, 12:38 PM
QUOTE(mb911 @ Jan 7 2024, 11:14 AM)
My laser cuts will be done in about a week or 2 and wanted to offer them up here before going to my website. They will be on the website for $65 plus shipping. I will be offering these to the group for $45 plus shipping. They will all be powder painted flat black and come with hardware. You will likely have to drill the mount for your exact FE. I use a purple K thanks to Greg Coons suggestion years ago. This will fit all 914s with movable passenger seats. Zero mods required for the car and the parts are laser cut with no welds so look very clean.
PayPal or check are accepted. I would expect that shipping will be in the $15-$17 dollar range for most locations. If PayPal I will ask for the 3% fees.
You can email or PM for details
Or post here
Please add me to the list.
Posted by: NARP74 Jan 17 2024, 01:06 PM
These mount to the stock seats correct?
Posted by: Cairo94507 Jan 17 2024, 02:09 PM
That is my understanding; mounts to the seat pan so the seat still slides back and forth.
Posted by: mb911 Jan 17 2024, 02:41 PM
QUOTE(NARP74 @ Jan 17 2024, 11:06 AM)
These mount to the stock seats correct?
Correct
Posted by: mb911 Jan 17 2024, 02:42 PM
QUOTE(Txbentleyboy @ Jan 17 2024, 10:38 AM)
QUOTE(mb911 @ Jan 7 2024, 11:14 AM)
My laser cuts will be done in about a week or 2 and wanted to offer them up here before going to my website. They will be on the website for $65 plus shipping. I will be offering these to the group for $45 plus shipping. They will all be powder painted flat black and come with hardware. You will likely have to drill the mount for your exact FE. I use a purple K thanks to Greg Coons suggestion years ago. This will fit all 914s with movable passenger seats. Zero mods required for the car and the parts are laser cut with no welds so look very clean.
PayPal or check are accepted. I would expect that shipping will be in the $15-$17 dollar range for most locations. If PayPal I will ask for the 3% fees.
You can email or PM for details
Or post here
Please add me to the list.
Pm me if your interested so I can get you payment details or go to my site and buy them there
Posted by: worn Jan 17 2024, 06:27 PM
QUOTE(Cairo94507 @ Jan 12 2024, 10:45 AM)
Money sent.
You will not be disappointed.
Posted by: mb911 Jan 18 2024, 02:46 PM
Everyone should be getting them starting today. Anxious to hear how you like them.
Posted by: strawman Jan 18 2024, 03:03 PM
I just sent a PM for a mount that I'll put in Nancy's 914. Thanks!
Geoff
Posted by: mb911 Jan 18 2024, 05:39 PM
QUOTE(strawman @ Jan 18 2024, 01:03 PM)
I just sent a PM for a mount that I'll put in Nancy's 914. Thanks!
Geoff
Invoice sent
Posted by: mm911 Jan 19 2024, 08:48 PM
QUOTE(mb911 @ Jan 18 2024, 05:39 PM)
QUOTE(strawman @ Jan 18 2024, 01:03 PM)
I just sent a PM for a mount that I'll put in Nancy's 914. Thanks!
Geoff
Invoice sent
pm sent
Posted by: mb911 Jan 21 2024, 01:24 PM
Everyone that has paid as of today your parts have shipped thanks again everyone
Posted by: abes914 Feb 3 2024, 11:59 AM
Hi ben, if you are still doing this, I would like to get one please.
Thanks.
A be
Posted by: BillC Feb 3 2024, 12:22 PM
QUOTE(abes914 @ Feb 3 2024, 12:59 PM)
Hi ben, if you are still doing this, I would like to get one please.
Thanks.
A be
If it's not too late, I'd like to get one as well.
Thanks!
Posted by: mb911 Feb 3 2024, 02:30 PM
Guys there are on my site for sale. I have 25 in stock. https://914-6werkshop.com/product/fire-extinguisher-mount/
Posted by: abes914 Feb 3 2024, 09:15 PM
QUOTE(mb911 @ Feb 3 2024, 12:30 PM)
Guys there are on my site for sale. I have 25 in stock. https://914-6werkshop.com/product/fire-extinguisher-mount/
Thank you! Ordered one!
Posted by: ConeDodger Feb 4 2024, 10:56 AM
I’ll take one…
Posted by: mb911 Feb 4 2024, 11:09 AM
QUOTE(ConeDodger @ Feb 4 2024, 08:56 AM)
I’ll take one…
If you could order from my website that would be great. Posted the link a few posts earlier
Posted by: BillC Feb 4 2024, 05:25 PM
Ordered.
Posted by: mb911 Feb 5 2024, 07:35 PM
QUOTE(BillC @ Feb 4 2024, 03:25 PM)
Ordered.
Thanks hope to ship tomorrow
Posted by: mb911 Feb 9 2024, 03:56 PM
All have shipped as of today. Thanks for the continued support
Posted by: mb911 Feb 13 2024, 08:52 AM
Still plenty left and sale is still on.
Posted by: Tonyooc Feb 14 2024, 06:22 AM
I will take one. Do you know what size fire extinguisher fits on it and where to get one.
Posted by: mb911 Feb 14 2024, 11:14 AM
QUOTE(Tonyooc @ Feb 14 2024, 04:22 AM)
I will take one. Do you know what size fire extinguisher fits on it and where to get one.
@http://www.914world.com/bbs2/index.php?showuser=21763 I posted the link in the thread to order directly off my website. You can use the mount for whatever FE you would like. I use a purple k
Posted by: mb911 Feb 14 2024, 11:16 AM
QUOTE(ConeDodger @ Feb 4 2024, 08:56 AM)
I’ll take one…
@http://www.914world.com/bbs2/index.php?showuser=3380 the link on how to order from my website is a few posts up. Keeps it simple and easy for me to track
Posted by: mb911 Feb 14 2024, 05:23 PM
All organized and ready to ship out.
Posted by: mb911 Feb 20 2024, 04:29 PM
On sale through the end of the month
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)