Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ If You Have a Lift
Posted by: 76-914 Apr 19 2024, 08:30 AM
I was shopping for some replacement pads for my BendPack MAXX JAC and stumbled across these. These will be used in addition to the round pads. My OEM pads have split over the years.
https://www.amazon.com/Five-Bananas-Anti-Slip-Adapter-Support/dp/B07RZQLW9G/ref=sr_1_6?crid=1K41XSXZQ387R&dib=eyJ2IjoiMSJ9. LA61NNjtr2PrFN1w_egqOdWRlrY8ftHzivCQfhoRyUXP0L49NmqOCkBkVhXeUGmzUTc36s8UT9dNuJ77
Vq_CnjZ4YWl2bdxgmv85TqaYVkndE- 5yuczYXRq8ktYW6OY0ubpOuv7_cd_JjcRFwnKsiQbxFbj_RBmEY7AtzTt1P63bcSS1SwqpzPW7d_kEFe
D1VCW6IUFFh9cSzqWJf9u56pvqBFyrSdmRQj82i0ItC7EDPLNx2k6OAxxm8QiD3lNggvBx8UJNY07Qt_
q5MfUcoB66Vhr4plZuCsH_wl34mHI.G5nuukjM7nup5atG8TwFgmzhqKoykqdA0x5wv0japGo&dib_tag=se&keywords=hard%2Brubber%2Bpads%2Bfor%2Bcar%2Blift&qid=1713536079&sprefix=hard%2Brubber%2Bpads%2Bfor%2Bcar%2Blift%2Caps%2C152&sr=8-6&th=1
Posted by: technicalninja Apr 19 2024, 08:58 AM
Thanks!
Ordered a set for my BendPack asymmetric.
My original pads lasted 5 years.
BendPack always shows "out of stock" and the inexpensive replacements lasted 6 months.
I've been on sacrificial wooden pads for 3 years now...
I wonder how long these will last???
They ARE budget friendly!
Posted by: 76-914 Apr 19 2024, 09:49 AM
Thanks!
Ordered a set for my BendPack asymmetric.
My original pads lasted 5 years.
BendPack always shows "out of stock" and the inexpensive replacements lasted 6 months.
I've been on sacrificial wooden pads for 3 years now...
I wonder how long these will last???
They ARE budget friendly!
On that same page are another set that are twice as much but you might want those since you have an 8-5 shop. did you see the Bend Pack replacement pads, too?
Posted by: technicalninja Apr 20 2024, 08:01 PM
Got them today!
Much denser and smaller than I expected.
Good accessories for my lift!
One thing I didn't expect is they look like they will fit late model BMWs.
Late Bimmers have these super cool rubber pads built into the bottom four corners of the pan specifically for lifting.
Bad-assed until they fall out which they ALL do sooner or later.
They leave behind a square depression that I have special trimmed 2x4s for.
These wooden "pucks" disintegrate pretty regularly, and these rubber blocks look like they will fit perfectly!
Thanks for the link @http://www.914world.com/bbs2/index.php?showuser=9964
Posted by: Gatornapper Apr 21 2024, 11:31 AM
Thanks! Just ordered!
My 12 year old pads are fine but these are added essentials!
GN
I was shopping for some replacement pads for my BendPack MAXX JAC and stumbled across these. These will be used in addition to the round pads. My OEM pads have split over the years.
https://www.amazon.com/Five-Bananas-Anti-Slip-Adapter-Support/dp/B07RZQLW9G/ref=sr_1_6?crid=1K41XSXZQ387R&dib=eyJ2IjoiMSJ9. LA61NNjtr2PrFN1w_egqOdWRlrY8ftHzivCQfhoRyUXP0L49NmqOCkBkVhXeUGmzUTc36s8UT9dNuJ77
Vq_CnjZ4YWl2bdxgmv85TqaYVkndE- 5yuczYXRq8ktYW6OY0ubpOuv7_cd_JjcRFwnKsiQbxFbj_RBmEY7AtzTt1P63bcSS1SwqpzPW7d_kEFe
D1VCW6IUFFh9cSzqWJf9u56pvqBFyrSdmRQj82i0ItC7EDPLNx2k6OAxxm8QiD3lNggvBx8UJNY07Qt_
q5MfUcoB66Vhr4plZuCsH_wl34mHI.G5nuukjM7nup5atG8TwFgmzhqKoykqdA0x5wv0japGo&dib_tag=se&keywords=hard%2Brubber%2Bpads%2Bfor%2Bcar%2Blift&qid=1713536079&sprefix=hard%2Brubber%2Bpads%2Bfor%2Bcar%2Blift%2Caps%2C152&sr=8-6&th=1
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)