Ken Monihan, who did 95 percent of my install sent me these pics, and I thought I would share.
Ferg
Attached image(s)
DME
Attached image(s)
Mount
Attached image(s)
upandunder
Attached image(s)
mount
Attached image(s)
last one, tranny linkage
Attached image(s)
Looks good. I am about two weeks away from starting my 3.2 conversion. Any tips?
Thanks for the pics Mike, what's the glowing green items in the picture of the engine (upside down one)? I need to flip that pic 180 degrees so I can make out the plumbing set-up.
Doug C
QUOTE (736conver @ Aug 23 2005, 11:01 AM) |
Looks good. I am about two weeks away from starting my 3.2 conversion. Any tips? |
The green is some sort of sealant used during the rebuild. I forgot the name.
Ferg.
Mike-
Sorry for the hijack. Is that your wagon in your avatar? Never saw you as a land yacht kinda guy.
QUOTE (BMartin914 @ Aug 23 2005, 11:19 AM) |
Mike- Sorry for the hijack. Is that your wagon in your avatar? Never saw you as a land yacht kinda guy. :confused: |
Nice pics mike.
I'm gonna share them with dad.
here is the rotation:
Attached image(s)
Thanks for the flip Brant.
Doug, the lines you see in the above pic at the right rear of motor lead to my oil cooler above the pass side driveshaft.
Ferg
QUOTE (Ferg @ Aug 23 2005, 11:27 AM) |
I'm a huge wagon guy... |
> Doug, the lines you see in the above pic at the right rear of motor lead to my oil cooler above the pass side driveshaft. Ferg
I don't understand what is going on there... Why two lines? Are you doing:
tank->engine->cooler->engine->tank?
It should be:
tank->engine->cooler->tank
-Steve
QUOTE (siverson @ Aug 23 2005, 02:41 PM) |
> Doug, the lines you see in the above pic at the right rear of motor lead to my oil cooler above the pass side driveshaft. Ferg I don't understand what is going on there... Why two lines? Are you doing: tank->engine->cooler->engine->tank? It should be: tank->engine->cooler->tank -Steve |
QUOTE (Aaron Cox @ Aug 23 2005, 01:44 PM) | ||
and it looks like -10??? |
I'm not mike, nor do I play him on T.V.
but I think I can explain.
mike has a rear mounted aux cooler.
So I think the lines are out of motor to rear cooler, out of rear cooler and back along stock location to wrap around front of motor and then tank
correct order of things.
brant
I think the line with the 90 out of the case, is my engine to cooler, then oil returns to the tank via the long wrapped hard line running towards the front makes a 90 and goes to the tank, but this is by memory. I'll check and take pics when I get home.
Ferg.
or what Brant said
Ahh - ooops. That does sound right. From the picture, it looks like both lines are connected to the long tube from the engine oil output, but now I see how one is in and one is out.
-Steve
QUOTE (Ferg @ Aug 23 2005, 11:27 AM) | ||
ahh, I was waiting for someone to ask, that's Jezebel the war wagon. Kinda a family owned car (I have a close group of friends in boulder, it is/was our racing transport car) She's shared and maintained by all. She holds nine bikes, or 8 and a tandem. I'm a huge wagon guy... 60's and 70's muscle car wagon's . |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)