Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Trailer Question

Posted by: richardL Jul 29 2003, 02:05 PM

Can someone explain the standard types of connectors between the tow vehicle and a typical trailer.

Mostly I recall seeing a circular plug, 6 pin I think. However, my Explorer and other vehicles I've looked at has an inline 4 pin connector attached.

So, if I wanted to tow do I have to buy an adapter to the circular connector, or do trailers have a 4 pin inline connector or what? What type of connector would be found on most car trailers?

Thanks,
Richard

Posted by: tryan Jul 29 2003, 02:17 PM

four pin is most common. my trucks always come with a 7 (round)to 4 (rectangular)adapter. pollack? is the brand name.

Posted by: Mueller Jul 29 2003, 02:25 PM

http://www.trailerwiring.com/

My truck has the 7-pole round connector which uses an adaptor to go the the 4-pin flat connector of my trailer.

4-pin, basic lights

7-pin, lights plus electric brakes if trailer is so equipped (and truck has the modual)

Posted by: URY914 Jul 29 2003, 02:28 PM

What Mueller said.

Paul

Posted by: Rob Ways Jul 29 2003, 10:43 PM

Like you my 4Runner had the inline 4 pin. When I bought a trailer (great deal BTW) the shop told me to go to a round 7 pin so I could control the brakes on the trailer.

I went to an RV shop and for $400 got the wiring and brake controller bought and installed. I think it only uses 6 of the connections, with the 7th available for other apps.

Good luck!!

Posted by: URY914 Jul 30 2003, 05:35 AM

The 7 pins are for:
1. right turn
2. left turn
3. brake
4. ground
5. back-up (optional)
6. brakes (optional)
7. extra pin (use for running lights, interior light, etc)

Paul