Gas gets to the carb and not getting fuel to the cylinders?
Anyone have experience with this monster?
hey Macpro, are you Brian?
Prolly TOO lean. Try dumping some quick start down the hole while cranking the motor. If no start then you have ignition or spark issues.
BTW....even if it DOES run, don't expect too much from that carb.
QUOTE (SEEMORE BUTZ @ Sep 5 2005, 03:48 PM) |
Prolly TOO lean. Try dumping some quick start down the hole while cranking the motor. If no start then you have ignition or spark issues. BTW....even if it DOES run, don't expect too much from that carb. |
Thank for the heads up! Tried the starting fuild and zip!
sorry, not Brian. I'm Greg Fox. Who is he? Is he in Ft. Worth?
Yea, it was under the tree for about 6 years so it really could use a rebuild. I think I'll take the cab to Auto Zone and have them match it to a kit.
Really enjoyed the MUSR 7 and meeting all the folk that attended this year. Looking forward to the next one...I'll have mine ready. Have we heard of were it is to be held next time?
Greg
QUOTE (macpro @ Sep 5 2005, 10:11 PM) |
Tried the starting fuild and zip! Have we heard of were it is to be held next time? Greg |
Thans Jamesw!
Got spark and check coil and condenser...all OK.
Maybe timing... PO put 009 dizzy in and I not certain that he did it correctly.
My wife and I went on line and looked at the picture of the house. I'll let you know when she would like to come look, OK?
Thanks for the offer to look the carb up but I just visit the Auto parts place and they will have to deal with it.
I feel that we are close (I'm an Optimist) to getting "Whitey" running but needs that one thing that will light that smile up.
QUOTE (macpro @ Sep 5 2005, 07:11 PM) |
sorry, not Brian. I'm Greg Fox. Who is he? Is he in Ft. Worth? |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)