Printable Version of Topic

Posted by: NARP74 Aug 1 2026, 08:26 AM

The car had a Momo Speed 4 installed when I purchased it. Now that I am digging into the steering column, I have found a horn ground issue. PO had stranded wire wrapped around one of the mounting screws for the horn ground. Functional but tacky. I am looking for a better solution.

I purchased on of these but it will not work for my steering wheel.
https://ltbautosports.com/momo-horn-button-retaining-ring/
Kind of a different Momo design, the horn button is not on the wheel, but in a cover that sits above the wheel.

Anyone else have horn ground solutions for Momo installs?

Posted by: NARP74 Aug 2 2026, 01:27 PM

Where can I find some of the clips in this photo? And what are they called?
I think I can use them for a ground on the steering wheel.

http://www.914world.com/bbs2/uploads/post-28542-1784399970_thumb.jpg

Posted by: NARP74 Aug 6 2026, 05:36 PM

Hard to believe no good solutions for this yet. I can't be the only one in this situation.

Posted by: NARP74 Aug 31 2026, 11:53 AM

In case someone needs a solution in the future.
My solution was to purchase the JWest eccentric adapter ring and that allowed me to use the MOMO horn ring. Nothing else I tried ever worked or was reliable and had a usable connection. My setup was a little strange due to the steering wheel and old MOMO adapter hub the car had on it when purchased.

Got great service and support from JWest. Happy to cross this off my list, been there for a very long time.

Posted by: DennisV Aug 31 2026, 12:05 PM

QUOTE(NARP74 @ Aug 2 2026, 12:27 PM)

Posted by: NARP74 Aug 31 2026, 12:18 PM

I don't think so but I am not sure.
They are more like this;
https://www.homedepot.com/p/Commercial-Electric-14-12-AWG-Steel-Ground-Clips-Green-10-Pack-GOEC-CLIP/310741858

I would still like to know where to buy those clips.

Posted by: tailwind22 Sep 1 2026, 08:49 AM

I have found the clips on PET before and ordered them.

Posted by: NARP74 Sep 1 2026, 11:49 AM

QUOTE(tailwind22 @ Sep 1 2026, 08:49 AM)