Printable Version of Topic
914World.com _ 914World Garage _ Beautiful Becker Europa 2 Radio - My Stupid Questions
Posted by: 914Sixer Aug 14 2026, 03:54 PM
Plug and play. You have to pull knobs and face off radio. Drop radio in hole. Slot the locking bars and tighten them up. Put a back strap on to support the radio. Ground for radio is back strap. Single black wire is for 12V + to switched source. Other two wires are for R & L speakers, they are marked on the case.
Yes it is a correct available radio for 1974 LE. Radio was introduced in 1972.
Posted by: friethmiller Aug 14 2026, 03:58 PM
QUOTE(914Sixer @ Aug 14 2026, 04:54 PM)

Plug and play. You have to pull knobs and face off radio. Drop radio in hole. Slot the locking bars and tighten them up. Put a back strap on to support the radio. Ground for radio is back strap. Single black wire is for 12V + to switched source. Other two wires are for R & L speakers, they are marked on the case.
Yes it is a correct available radio for 1974 LE. Radio was introduced in 1972.
Excellent! Thanks Mark. I sure hope I can get to it this weekend - if not very soon.
Posted by: Shivers Aug 14 2026, 04:07 PM
QUOTE(friethmiller @ Aug 14 2026, 02:58 PM)

QUOTE(914Sixer @ Aug 14 2026, 04:54 PM)

Plug and play. You have to pull knobs and face off radio. Drop radio in hole. Slot the locking bars and tighten them up. Put a back strap on to support the radio. Ground for radio is back strap. Single black wire is for 12V + to switched source. Other two wires are for R & L speakers, they are marked on the case.
Yes it is a correct available radio for 1974 LE. Radio was introduced in 1972.
Excellent! Thanks Mark. I sure hope I can get to it this weekend - if not very soon.

https://www.youtube.com/watch?v=pxgI29vM0YE
Posted by: friethmiller Aug 14 2026, 09:15 PM
QUOTE(Shivers @ Aug 14 2026, 05:07 PM)

QUOTE(friethmiller @ Aug 14 2026, 02:58 PM)

QUOTE(914Sixer @ Aug 14 2026, 04:54 PM)

Plug and play. You have to pull knobs and face off radio. Drop radio in hole. Slot the locking bars and tighten them up. Put a back strap on to support the radio. Ground for radio is back strap. Single black wire is for 12V + to switched source. Other two wires are for R & L speakers, they are marked on the case.
Yes it is a correct available radio for 1974 LE. Radio was introduced in 1972.
Excellent! Thanks Mark. I sure hope I can get to it this weekend - if not very soon.

https://www.youtube.com/watch?v=pxgI29vM0YE
That helps! Thank you
Posted by: gulf908 Aug 14 2026, 10:19 PM
fm
I have one of these but 6 button - a little extravagance from a later year - 1978
what year code is yours ?
these are worth a good detailed installation
mine takes a minute or two to warm up properly
also make sure you have a good aerial and good speakers - mine are from Konigs autoradio in Haan Germany
HTH
Dennis
Posted by: Shivers Aug 15 2026, 11:13 AM
QUOTE(friethmiller @ Aug 14 2026, 08:15 PM)

QUOTE(Shivers @ Aug 14 2026, 05:07 PM)

QUOTE(friethmiller @ Aug 14 2026, 02:58 PM)

QUOTE(914Sixer @ Aug 14 2026, 04:54 PM)

Plug and play. You have to pull knobs and face off radio. Drop radio in hole. Slot the locking bars and tighten them up. Put a back strap on to support the radio. Ground for radio is back strap. Single black wire is for 12V + to switched source. Other two wires are for R & L speakers, they are marked on the case.
Yes it is a correct available radio for 1974 LE. Radio was introduced in 1972.
Excellent! Thanks Mark. I sure hope I can get to it this weekend - if not very soon.

https://www.youtube.com/watch?v=pxgI29vM0YE
That helps! Thank you
You are welcome Sir
Posted by: scallyk9 Aug 15 2026, 04:10 PM
I have the exact same Becker installed in my restored LE (Bumblebee) and it is period correct and would have been available from your local Porsche dealer in 1974. All radios were dealer installed and you chose from a rack. As I recall, Beckers on top, some Blaupunkts below them, and a Motorola or two on the bottom. The Becker Mexico FM Cassette deck was the most expensive.
A knowledgeable PCA Concours judge once told me that I had the Mercedes version with the chrome ring knobs and I should have plain black soft-touch knobs in a vintage Porsche, but a photo of the chrome ring version is in Dr. B. Johnson's 914 "A Restorer's Guide to Authenticity III" as a dealer option or owner installed.
Posted by: Superhawk996 Aug 17 2026, 06:33 PM
QUOTE(scallyk9 @ Aug 15 2026, 06:10 PM)

A knowledgeable PCA Concours judge once told me that I had the Mercedes version with the chrome ring knobs and I should have plain black soft-touch knobs in a vintage Porsche, but a photo of the chrome ring version is in Dr. B. Johnson's 914 "A Restorer's Guide to Authenticity III" as a dealer option or owner installed.
Funny how that works.
A bunch of snobs that never wanted to acknowledge the 914 as a Porsche are now suddenly experts on 914’s.
NARP forever
Posted by: friethmiller Aug 17 2026, 11:04 PM
QUOTE(scallyk9 @ Aug 15 2026, 05:10 PM)

I have the exact same Becker installed in my restored LE (Bumblebee) and it is period correct and would have been available from your local Porsche dealer in 1974. All radios were dealer installed and you chose from a rack. As I recall, Beckers on top, some Blaupunkts below them, and a Motorola or two on the bottom. The Becker Mexico FM Cassette deck was the most expensive.
A knowledgeable PCA Concours judge once told me that I had the Mercedes version with the chrome ring knobs and I should have plain black soft-touch knobs in a vintage Porsche, but a photo of the chrome ring version is in Dr. B. Johnson's 914 "A Restorer's Guide to Authenticity III" as a dealer option or owner installed.
Good to hear this. I ordered a 2 din radio plate from 914 rubber thinking this would be the correct opening for this radio install. I don’t fully understand how to mount a face plate to the dash yet but I can’t see how it would work with the plate that has separate holes for the knobs.
Posted by: friethmiller Aug 18 2026, 08:35 AM
QUOTE(gulf908 @ Aug 14 2026, 11:19 PM)

fm
I have one of these but 6 button - a little extravagance from a later year - 1978
what year code is yours ?
these are worth a good detailed installation
mine takes a minute or two to warm up properly
also make sure you have a good aerial and good speakers - mine are from Konigs autoradio in Haan Germany
HTH
Dennis

Dennis,
First off, I think Aussies & Kiwis who own 914s are the best!

Not sure on the date code. Stickers are all gone. Any stampings are hard to read. Is there a place to look for this date? The speakers I want for this radio are a bit pricey and would come from Germany. Going to wait... just bought the final 3 tires for the LE. Trying to keep the expenditures under the wife's radar
Posted by: Ninja Aug 19 2026, 07:57 AM
QUOTE(friethmiller @ Aug 18 2026, 09:35 AM)

Trying to keep the expenditures under the wife's radar

I've been married for four decades...
Trust me, SHE KNOWS!
Posted by: Ninja Aug 19 2026, 07:59 AM
What I really want to know is how are you going to fix the chrome "pops" on that surround?
You've been able to fix everything else...
Posted by: friethmiller Aug 19 2026, 09:36 AM
QUOTE(Ninja @ Aug 19 2026, 08:59 AM)

What I really want to know is how are you going to fix the chrome "pops" on that surround?
You've been able to fix everything else...
Nothing more than #0000 steel wool on that item. It should make the "pops" less noticeable. Ninja, you sound like a "concourse weenie"
Posted by: Ninja Aug 19 2026, 11:38 AM
QUOTE(friethmiller @ Aug 19 2026, 10:36 AM)

QUOTE(Ninja @ Aug 19 2026, 08:59 AM)

What I really want to know is how are you going to fix the chrome "pops" on that surround?
You've been able to fix everything else...
Nothing more than #0000 steel wool on that item. It should make the "pops" less noticeable. Ninja, you sound like a "concourse weenie"

But, you RESTORE like a concours weenie!
Posted by: scallyk9 Aug 19 2026, 09:17 PM
Both the glass pin stripe radio faceplate and the chrome surrounds are available from a Becker vendor and available on eBay. I had to purchase both for my Europa II Stereo.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)