Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Do you think I need new piston rings?

Posted by: Eddie914 Sep 13 2005, 01:16 AM

I drained the oil in the 2.7 tonight. Look what I found!


Attached image(s)
Attached Image

Posted by: Eddie914 Sep 13 2005, 01:18 AM

Appears to have been a Mahle piston ...


Attached image(s)
Attached Image

Posted by: Eddie914 Sep 13 2005, 01:19 AM

I don't think Duct Tape will fix it this time ...


Attached image(s)
Attached Image

Posted by: Eddie914 Sep 13 2005, 01:20 AM

more carnage ...


Attached image(s)
Attached Image

Posted by: V6914 Sep 13 2005, 01:31 AM

So, it's a 5 cylinder now, that makes it a volvo or an audi or saab, 1 of those have a 5 cylinder?. happy11.gif

All kidding aside, I see your pain.

Posted by: sixnotfour Sep 13 2005, 02:23 AM

barf.gif

Posted by: Bleyseng Sep 13 2005, 07:46 AM

wasn't it a MotorMeister engine?

now its a 5 cylinder, so Turbo it! biggrin.gif

Posted by: DNHunt Sep 13 2005, 07:58 AM

Ouch

Have you found anything to replace it yet?

Dave

Posted by: Eddie914 Sep 13 2005, 09:34 AM

I have found another 2.7 CIS engine as a replacement. The seller got the engine as spare with a 914/4 he purchased. He decided to stay with the stock 4 cylinder engine so he sold me the 2.7.

Wish me luck. I'm hoping it arrives in about a week.

I'll install the 40IDA Webers from the KaBlammo engine.

Eddie

Posted by: Cap'n Krusty Sep 13 2005, 10:08 AM

QUOTE (V6914 @ Sep 12 2005, 11:31 PM)
So, it's a 5 cylinder now, that makes it a volvo or an audi or saab, 1 of those have a 5 cylinder?. happy11.gif

All kidding aside, I see your pain.

Not SAAB, but don't forget Honda, Volvo and MB .................. The Cap'n

Posted by: Brando Sep 13 2005, 01:22 PM

QUOTE (Eddie914 @ Sep 13 2005, 07:34 AM)
I have found another 2.7 CIS engine as a replacement. The seller got the engine as spare with a 914/4 he purchased. He decided to stay with the stock 4 cylinder engine so he sold me the 2.7.

Wish me luck. I'm hoping it arrives in about a week.

I'll install the 40IDA Webers from the KaBlammo engine.

Eddie

KaBlammo is right!

Where did the motor come from? My dad is having a 'Motor Meister Grenade' put in my mom's SC...

Posted by: pete-stevers Sep 13 2005, 02:40 PM

Any theories on how the engine blew, ohmy.gif

Posted by: Eddie914 Sep 13 2005, 05:47 PM

The engine was pretty tired when I bought it about two years ago. It smoked on startup, smoked on upshifts, had marginal oil pressure and leaked quite a bit ... although it seemed to have fairly decent power.

I knew a rebuild would be extensive and most likely cost more than I paid for the entire car. So I decided to run it "as-is" and see how long it would last.

I ran it pretty hard ... mostly on the track. I always checked the oil level and changed the Kendall 20W50 regularly. I added a front oil cooler and even ducted the cooler through the hood (this helped alot, dropping the oil temperatures from 235+ to 200+).

It probably dropped an exhaust valve. When the piston is forced to the top of the stroke with nowhere to go ... Ka-Blammo! I'm guessing that the valve guides were worn badly resulting in lateral forces on the valve stem, since the valves may not always seat squarely on the valve seat. Eventually the head pops off the valve.

I was hoping it would last a year. It made it nearly two.

Life goes on. Can't cry over shattered pistons.

Enjoy your life...it's the only one you'll get.

Eddie

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)