Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ This is for the V8 Guys

Posted by: pjhaun Sep 19 2005, 08:26 PM

If one uses a small cap disributor; Do you still have to cut out a notch in the rear truck for clearance?

Thank You!!!!!!

Posted by: skline Sep 19 2005, 08:32 PM

You should, there would not be much clearance otherwise. I have seen them where they dont but had problems with arcing of the wires on the body.

Posted by: 914GT Sep 19 2005, 08:35 PM

The cap by itself will clear but after the wires are installed it'll be a tight fit. In addition you won't have the option of pulling the distributor with the engine in the car.