I have a pair of blue 150lb springs originally from a koni coilover kit, and I'd like to know if anyone out there knows the part# or kit name. Heres a link to the pics: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8000365999&sspagename=STRK%3AMESE%3AIT
Thanks,
Dave
QUOTE (Fast9146 @ Sep 20 2005, 08:23 AM) |
I have a pair of blue 150lb springs originally from a koni coilover kit, and I'd like to know if anyone out there knows the part# or kit name. Heres a link to the pics: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8000365999&sspagename=STRK%3AMESE%3AIT Thanks, Dave |
Jason over at paragon products can help you.
http://www.paragon-products.com/
Thats where I got my kit from
Here's the specific link to the kit. Will be cheaper though as you dont need the springs.
http://www.paragon-products.com/product_p/914_arhk.htm
here you go...just make sure you get the right ID, they have 2 different sizes for the Koni's and other shocks...there are also different lengths of the threaded tube.
http://www.colemanracing.com/catalog/product_info.php?products_id=1524&osCsid=9d3099a4ed488187043b5cd81eab4a90
sorta related:
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=33544&hl=coleman
QUOTE (Mueller @ Sep 20 2005, 09:58 AM) |
here you go...just make sure you get the right ID, they have 2 different sizes for the Koni's and other shocks...there are also different lengths of the threaded tube. http://www.colemanracing.com/catalog/product_info.php?products_id=1524&osCsid=9d3099a4ed488187043b5cd81eab4a90 sorta related: http://www.914world.com/bbs2/index.php?act=ST&f=2&t=33544&hl=coleman |
I think the coleman kit is a little big for the yellow konis. I remember buying those and they had a little side to side movement. I went with the paragon kit as it was a perfect fit.
I have a kit around here if someone is interested.
Dave,
What kin of shocks are you running.
QUOTE (736conver @ Sep 20 2005, 09:12 AM) |
I think the coleman kit is a little big for the yellow konis. I remember buying those and they had a little side to side movement. I went with the paragon kit as it was a perfect fit. I have a kit around here if someone is interested. |
Brian - will your coleman kit fit bistein sports?
My car has the paragon kit.
After digging through my parts I found I have two coleman kits
Dont know if they will fit Bilsteins.
They are 5 inches in length and id is 2.04
The other is 7 inches in length and id is 2.04
I have the othe misc pieces too just not sure if I have all of them.
If someone is interested PM or email me.
Another thing I didnt like about the coleman kit, besides the side to side fitting, was the metal ring you put on the shock didnt quite seat into the Koni shock. I used the original Konis clips with the paragon kit. THe ring is want holds the perch.
The two rings were opposites. Koni's was flat ring and the coleman kit was round. I suppose you could make the coleman ring work but I really dont want to mess around with a part that costs a couple of bucks and could cause more then a couple bucks worth of damage.
What would happen if one of the perches gave out at high speed. Not something I want to find out.
Here's the 5 inch
Attached image(s)
Thanks a lot guys!
Fast9146
If you want to try one of my coleman kits you can. If its works out for you you can have it for the cost of shipping . If not send it back and I will just ebay it.
im interested in a set....
let me go measure my bilsteins.....
AA
Aaron,
Same thing for you if you want. Shipping costs and they are yours.
QUOTE (736conver @ Sep 20 2005, 02:49 PM) |
Aaron, Same thing for you if you want. Shipping costs and they are yours. |
Aaron,
They shipped out this morning.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)