do you or anyone you know have a set of these kind of lug nuts that i will buy for my 914? They fit aftermarket american racing rims.
if you or someone you know has some please let me know. If so can you can please take a picture of it and post it
thanks for any info.
kenny
p.s. these are NOT acorn but shank mag style
Attached thumbnail(s)
these would be lug "bolts"
have you tried American Racing Wheels?
I did a quick glance at their website with no luck, but you might try e-mailing someone from Sales to see if they can help you out.
Next step would to hit the local wrecking yards, you might get lucky and find a vw bug with the same rims or brand
try a FLAPS...Autozone or somewhere should have a few...IIRC only a handful of lug bolts to choose from...couldnt find any to replace the ones used to fit the rivieras onto my 14'.
good ol' pin-drive lugs...
H&R might have what you need. talk to Mike Potter at parts4VWs.com ...
and if anyone has some of the longer lug bolts (for fuchs, mahles, pedrinis) please PM me. i am in desparate need.
QUOTE (TROJANMAN @ Sep 25 2005, 08:41 PM) |
and if anyone has some of the longer lug bolts ... i am in desparate need. |
QUOTE (ArtechnikA @ Sep 25 2005, 05:23 PM) | ||
call Mike Potter; H&R parts are TüV-rated good stuff. |
go to the web address i posted earlier: http://parts4vws.com/ and all the contact information is there, including his toll-free number...
Greg... check this out. It might be worth the spacers just to get the lug bolts
http://www2.cip1.com/ShoppingCart.asp?ProductCode=C21%2D2529
QUOTE (Eric_Shea @ Sep 26 2005, 05:51 PM) |
Greg... check this out. It might be worth the spacers just to get the lug bolts ... |
QUOTE |
These have the acorn taper (NOT BALL SEAT). These bolts do not fit the Empi style 8 spoke wheels. |
But that's what Greg "TROJANMAN" is looking for.
I think CIP1 has the other studs as well. Search "Lug Bolts" on their site and I think they call them adapter bolts. http://www2.cip1.com/ProductDetails.asp?ProductCode=ACC%2DC10%2D6779
QUOTE (Eric_Shea @ Sep 26 2005, 06:03 PM) |
But that's what Greg "TROJANMAN" is looking for. |
QUOTE (TROJANMAN @ Sep 26 2005, 03:07 PM) |
thanks eric. mike (h&r) has the bolts, but i need to know what the thread pitch is, anyone know? |
he's a VW guy.
QUOTE (Mueller @ Sep 26 2005, 06:12 PM) |
1.5mm..how the seller does not know that is strange.... |
I told you you'd find them in a couple of minutes
Even if you did have to
QUOTE (ArtechnikA @ Sep 26 2005, 03:16 PM) | ||
not really, IMO... like his web address implies - he does 99.9% water-VW parts, you and i know the pitch is the same but i do not fault Mike for not wanting to ass-u-me they are the same. |
so is 37 mm length ok?
as i was saying previosly at the beginning of this add does anybody have ...
do you or anyone you know have a new set of these kind of lug nuts that i will buy for my 914? They fit aftermarket american racing rims.
if you or someone you know has some please let me know. If so can you can please take a picture of it and post it
thanks for any info.
kenny
p.s. these are NOT acorn but shank mag style
Attached thumbnail(s)
why dont you call american racing ????
These guys have a big selection of lug nuts and boltshttp://www.prestigewheel.com
QUOTE (orange914 @ Sep 27 2005, 07:29 PM) |
as i was saying previosly at the beginning of this add does anybody have ... do you or anyone you know have a new set of these kind of lug nuts that i will buy for my 914? They fit aftermarket american racing rims. kenny |
QUOTE (TROJANMAN @ Sep 30 2005, 12:07 PM) |
sorry for the hijack, i thought your question was answered with http://www2.cip1.com/ProductDetails.asp?ProductCode=ACC%2DC10%2D6779 |
yes, i spoke to one of the vendors mentioned, and i should be receiving my bolts today. i am anxious to get home and try them on for size, but a little nervous about the shoulder of the bolt not fitting properly in the seat.
i know that they are 17 mm heads and that OEM bolts are 19mm heads. not sure if the 17mm head will make a difference in how it seats itself. but at least these are german, because the ebay ones were taiwanese i'm sure. but i'll let you know later.
how concerned do i need to be about a "snug" fit in the hole of the wheel? i know how well the OEM bolts fit, is it ok if these are a little off?
QUOTE (TROJANMAN @ Sep 30 2005, 03:52 PM) |
... not sure if the 17mm head will make a difference in how it seats itself.... |
i hope you're right. thanks.
i'll let you know tonight.
my lugs didn't show up
I just got a set of lug bolts from K. Berg Specialties...found them on eBay. They appear to have the correct seat...they fit nice and snug in Boxster wheels and I'll compare them to some 911 steel nuts when I get to the shop this weekend. 19mm hex and 30mm long...shiny chrome, made in China ....50 bucks for 20.
since when does UPS deliver after 6:45.
bolts just got here, gotta go try em out.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)