What color is the engine cooling shroud on the original 914/6?
What color is the engine tin?
Thanks
Eddie
ps: The replacement 2.7 (1977) has finally been delivered. Condition seems OK. Engine turns over freely. Carrera chain tensioners, Turbo lower valve covers, 11 blade fan, replacement oil return tubes, vavle guides look good and mostly original exhaust studs (10 original, 2 replacement ... no timecerts). We will attempt a compression check ASAP.
Wish me luck. There is not a lot of history on the engine. At least there aren't piston bits falling out of the exhaust ports like the old 2.7
QUOTE (Eddie914 @ Sep 29 2005, 04:31 PM) |
What color is the engine cooling shroud on the original 914/6? What color is the engine tin? |
Hey Eddie, there were just a few colors used on the engine shrouds. Green, black and red I think?
The original six's were black I think and a 2.7 should be green.
The tin was black.
Those lower turbo valve covers, shave off the rear upper corners of the fins otherwise you will have to lower the engine to remove them.
Or you can do what I do. Leave them off, hang the engine and then try to put them on. Only shave off what you need to. Works good.
Got any pictures for us?
Wasnt there a yellow shroud from the factory? And bare fiberglass (for the racecars)?
Ive always been partial to bare fiberglass, but I guess I need to get a six first...
QUOTE (Root_Werks @ Sep 29 2005, 04:34 PM) |
...a 2.7 should be green. |
2.2 T black
2.2 S red
2.4 T yellow
2.4 E green
2.4 S red
2.7nonS black
2.7 S green
3.0 SC red
Most of the shroud is black, but there is a gray piece leading back from the fan/alternator stand. My intake manifolds are black as well, although many I've seen weren't painted.
QUOTE (sixnotfour @ Sep 29 2005, 12:51 PM) |
2.2 T black 2.2 S red 2.4 T yellow 2.4 E green 2.4 S red 2.7nonS black 2.7 S green 3.0 SC red |
Does this mean if I change the color of my shroud, the engine will make more HP?
:hijackover:
Thanks for the color chart.
QUOTE (sixnotfour @ Sep 29 2005, 12:51 PM) |
2.2 T black 2.2 S red 2.4 T yellow 2.4 E green 2.4 S red 2.7nonS black 2.7 S green 3.0 SC red |
QUOTE (SLITS @ Sep 29 2005, 01:36 PM) |
Does this mean if I change the color of my shroud, the engine will make more HP? :hijackover: Thanks for the color chart. |
QUOTE (sixnotfour @ Sep 29 2005, 04:51 PM) |
2.2 T black 2.2 S red 2.4 T yellow 2.4 E green 2.4 S red 2.7nonS black 2.7 S green 3.0 SC red |
That is a good point, how many engines have the stock shroud still on them? Probably a lot, but many of them have probably been changed out over time.
I guess you could always look for your favorite color? I have very honestly never cared what color my shroud was. Alway had bigger fish to fry. Like oil leaks.
my 75 911S had an apple green shroud,
BTW eddie wants Yellow cause its faster
Rattle can engine enamel works best
It gets hot down on top of the heads.
I'm paintin mine Chevy Orange!
(To match the tangerine of course)
QUOTE (sixnotfour @ Sep 29 2005, 03:32 PM) |
my 75 911S had an apple green shroud, |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)