Ok I'm ready to pull the motor next week I think
So I was wondering if I might be able to appeal to the kinder side of two or three or more of you, to come over and give me a hand. beer and BBQ is on me..... Not the cheap crap either. I'll go all out and splurge for the Shaffer... LOL..
Was hoping to do it next Saturday the 8th, any takers?
Say around 10:00 am......
Aaron you available?
Brian
8th is a saturday.
Where's Lake Forest? Work sundays so if it's a saturday and within range I can lend a hand.
QUOTE (bmunday @ Oct 1 2005, 12:39 PM) |
Ok I'm ready to pull the motor next week I think So I was wondering if I might be able to appeal to the kinder side of two or three or more of you, to come over and give me a hand. beer and BBQ is on me..... Not the cheap crap either. I'll go all out and splurge for the Shaffer... LOL.. Was hoping to do it next Sunday the 8th, any takers? Brian |
QUOTE (PKRMONY @ Oct 1 2005, 11:44 AM) |
Brando LOVES BUD Right Brando? |
Sorry I changed the date and not the day.Saturday would be great. The 8th.
Lake Forest, is just south of the El Toro "Y", where the 5 and 405 meet... North of Mission Viejo.
Please post or PM the address, thanks
I am off of the Lake FOrest exit off of the 5 fwy, just South of the "Y", 5 and 405 meet.
If you familiar with the area, I live next to El Toro High School. If you ant directions, PM me and I will do the best I can.
Oh Brando, Crap beer is not allowed in my house.... If it's see through it ain't beer...
Dos Equis, Negro Modello, Sam Adams ok?
Come on free beer and food..???? I really don't need more then one or two guy's but wouldn't mind meeting the of the people on the board.... Beer is still free... Just drive your teenss if you can, I would just like to dream about driving one...
QUOTE (bmunday @ Oct 1 2005, 01:42 PM) |
Come on free beer and food..???? |
Well, move to Portland and I'll be glad to help out...and I like see-thru beer The northwest micro-brews are wasted on me.
QUOTE (Brando @ Oct 1 2005, 02:11 PM) | ||
Hey AARON he's singin your song! Put me down on the attendees list |
QUOTE (Air_Cooled_Nut @ Oct 1 2005, 02:11 PM) |
Well, move to Portland and I'll be glad to help out...and I like see-thru beer The northwest micro-brews are wasted on me. |
QUOTE (Brando @ Oct 1 2005, 03:11 PM) | ||
Hey AARON he's singin your song! Put me down on the attendees list |
Hi Brian, I'll swing by. Elliot will be out of town but I'm sure you'll have more people than you bargained for. Need any tools? I'll give you a call.
QUOTE (lagunero @ Oct 1 2005, 03:31 PM) |
Hi Brian, I'll swing by. Elliot will be out of town but I'm sure you'll have more people than you bargained for. Need any tools? I'll give you a call. |
Shameless bump.. Sorry..
Yup.. I'm down... BBBBuuuuRrrrPppp... (Wheeeww..Burrito's)
What time you want us there?
What do you want me to bring? Food? Drink? Skline?
You got any single chicks coming?
I can bring tools..
Aaron & MattR should come just to drink your beer..
Slits should come to tell the stories about the building of the Acropolis in Athens.
By the way... Why are you pulling the engine?
Last: What parts do you need for this car. Maybe we gots some parts for you???
Twystd1
Shit, i might not be able to make it. the PCA RSR A-X is on the 8th... 7AM-2PM.
hey bmunday... any chance you can convince joe sharp to trailer it to the A-X? We could get the engine out in a jiffy.
QUOTE (Brando @ Oct 1 2005, 09:26 PM) |
Shit, i might not be able to make it. the PCA RSR A-X is on the 8th... 7AM-2PM. hey bmunday... any chance you can convince joe sharp to trailer it to the A-X? We could get the engine out in a jiffy. |
I'm out. gotta work the ring toss booth at the school carnival
It's a shame. Disassembly seems to be my strongest area of these cars.
Brian - i should be in. Its more fun than a day Autocross anyway... (and doesnt cost 50 bucks )
It's moer fun then Autocross? You feeling ok?
Hey I appreciate it Aaron, I can't thank you guy's enough. Beer and chow is on me. Anyone that needs directions, PM I will send directinos.
QUOTE (Aaron Cox @ Oct 1 2005, 11:29 PM) |
Brian - i should be in. Its more fun than a day Autocross anyway... (and doesnt cost 50 bucks ) |
I may be able to help. I'm new to the 914's ( one month of ownership!) but I've already pulled my engine and it's not disasemmbled and waiting for all the little parts to go back it.
I may be helping a guy put a 911 engine in his 914 next weekend. If not, I'm all yours.
Advice... start soaking the CV bolts NOW. A 3 hour engine drop turned into 6+ hours of hell because of ONE STUPID BOLT!!!!
QUOTE (bottomend @ Oct 2 2005, 02:16 PM) |
I may be able to help. I'm new to the 914's ( one month of ownership!) but I've already pulled my engine and it's not disasemmbled and waiting for all the little parts to go back it. I may be helping a guy put a 911 engine in his 914 next weekend. If not, I'm all yours. Advice... start soaking the CV bolts NOW. A 3 hour engine drop turned into 6+ hours of hell because of ONE STUPID BOLT!!!! |
Two guys should have the engine\trans on the ground in ONE hour.
The hardest part is scotting the disconnected CV joint\axles over the top of the motor as you pull it out.
With four guys or more: light BBQ, pull motor, coals are ready, cook!
Serious...
KT
QUOTE (Brando @ Oct 2 2005, 11:36 AM) | ||
Yeah... who wants to race with a buncha pinky-lifters anyhow?? Count me in Brian. The A-X will just be too costly. What time you want us there? |
QUOTE (Twystd1 @ Oct 1 2005, 05:34 PM) |
Yup.. I'm down... BBBBuuuuRrrrPppp... (Wheeeww..Burrito's) What time you want us there? What do you want me to bring? Food? Drink? Skline? You got any single chicks coming? I can bring tools.. Aaron & MattR should come just to drink your beer.. Slits should come to tell the stories about the building of the Acropolis in Athens. By the way... Why are you pulling the engine? Last: What parts do you need for this car. Maybe we gots some parts for you??? Twystd1 |
got a welder?
maybe one of us can come up with a front trunk piece for you....
QUOTE (Aaron Cox @ Oct 2 2005, 01:43 PM) |
got a welder? maybe one of us can come up with a front trunk piece for you.... |
Ok I count.
Aaron
MattR (possible) Didn't hear from him, but the name was mentioned..
Brando
Alberto
Twystd1
Bottomend, (possible)
Anyone else? Want tomake sure I Have enough beer and food. Again anyone that wants to drop by just to say hey and have a few beers, or soemthing else cold is welcome too. PM me if you need address phone or directions...
QUOTE (bmunday @ Oct 2 2005, 02:47 PM) | ||
No I don't, I was going to get the pan and call Joe.... It might be my next investment... Anyone have a floor jack I can barrow to pull the motor? I figure it would make the process easier... I have the basics in tools, anything special other then beer, I might need to go and get before Saturday? |
Well it's up on jack stands now, (4) and I do have a jack...
QUOTE (bmunday @ Oct 2 2005, 02:52 PM) |
Well it's up on jack stands now, (4) and I do have a jack... |
QUOTE (Aaron Cox @ Oct 2 2005, 01:59 PM) | ||
we are set. how high off the ground? |
Hi Brian,
I get home Friday night and if I'm not totally jet-lagged I'll try to be there. Remember to send your wife and kids away for the day and don't give these guys any food or beer till at least some work gets done on the car.
Cheers, Elliot
Hey Elliot,
How's things? I was a little worried about having the wife around.. My kids are already a bit mental, so I'm not to concerned..
If your up for coming over I will have a cold one for ya..
Any prefrence from you guy's on what you want to eat? ( I know this is like playing with fire), but thought I would ask.
No lobster, crab, or porter house... I was thinking burgers, chicken, sandwiches, the wife makes some killer home made burritos, marinaded beef all day long...
QUOTE (bmunday @ Oct 2 2005, 03:52 PM) |
Hey Elliot, How's things? I was a little worried about having the wife around.. My kids are already a bit mental, so I'm not to concerned.. If your up for coming over I will have a cold one for ya.. Any prefrence from you guy's on what you want to eat? ( I know this is like playing with fire), but thought I would ask. No lobster, crab, or porter house... I was thinking burgers, chicken, sandwiches, the wife makes some killer home made burritos, marinaded beef all day long... |
QUOTE (Aaron Cox @ Oct 2 2005, 04:09 PM) | ||
cook whatever you want...and if you want. my help is there regardless.... and - what do you want us to bring? |
Brian, sounds great!!!
We can have the motor out and on the ground in 45 mins tops. We got Aaron's out in just under 40 because his carb intakes were catching (he was only 8" off the ground) -- not counting all the other widgets we were fiddling with. (oel pump studs n stuff).
I'll bring an extra 2-ton floor jack and a creeper, and my triple-square (cheese-head). Don't forget a set of metric-hex-head sockets ranging from (at least) 6mm-10mm. 4mm-10mm preferred.
Go buy a can of PB Catalyst. Spray the engine bar mounts (you'll see them where the bar mounts to the body, by your heater flappers), spray the CV bolt mounts and also the little screws you will see in the engine bar. They've got a hex head on them, very small. Also buy a tube of Molybdenum grease (axle grease) and a box of large ziplock bags and a sharpie. You should be ready to rock
Any other plans "while you're in there" ?
I saw Brians car a few weeks ago. We pulled off both rocker panels and about a pound of dirt fell out of each side but not a lot of rust. We also pulled the battery, the FI brain and I think he was going to pull the fresh air blowers. What he needs is to expose everything and take care of the rust problems. I think he needs to do a lot of work with a wire brush attachment on his drill. I also noticed the right rear donut had a crack around it. A bit more welding to do and a whole lot of cleaning. I only had an hour or so and told him what I thought and I'm sure you guys will have a lot more good suggestions for him. It seemed, with the small amount of time I had with the car that the tub is in pretty good shape for the money.
It's great to have a new member and he is just a few minutes from Lagunero and me.
Cheers, Elliot
QUOTE (Brando @ Oct 2 2005, 04:57 PM) |
Brian, sounds great!!! We can have the motor out and on the ground in 45 mins tops. We got Aaron's out in just under 40 because his carb intakes were catching (he was only 8" off the ground) -- not counting all the other widgets we were fiddling with. (oel pump studs n stuff). I'll bring an extra 2-ton floor jack and a creeper, and my triple-square (cheese-head). Don't forget a set of metric-hex-head sockets ranging from (at least) 6mm-10mm. 4mm-10mm preferred. Go buy a can of PB Catalyst. Spray the engine bar mounts (you'll see them where the bar mounts to the body, by your heater flappers), spray the CV bolt mounts and also the little screws you will see in the engine bar. They've got a hex head on them, very small. Also buy a tube of Molybdenum grease (axle grease) and a box of large ziplock bags and a sharpie. You should be ready to rock Any other plans "while you're in there" ? |
Whoops... hex-head bolts I meant are in the SHIFTER bar... First one is under the boot by the trans... loosen the hose-clamp (if the clamp and boot are there). You'll see the hex head for the conical screw in there.
Second one is in the shift bar by the firewall. Pull the accordian boot over the linkage there and spray the conical screw there. You should see the hex head of the screw from the bottom.
Let it set for a few days... If we're lucky those will come out easy!!!
I guess the real experts (skline, clayton, joe) will comment if I forgot anything???
I'm not sure if I'm going to Thunderhill this weekend or not. I know one of the race cars is going, but I may send two techs up with it and wait to go north for the Sears event in a few weeks. IF I dont go I wouldnt mind showing up to help out.
B
Just, talked to Brian, gave him a heads up, on some of the people that, responded to his post, I told him if I didn't work sat, I'd come by and supervise the children from the CLUB
I'm gunna bring my good old trusty RED tool box with me just for Shi%s and Grins...
Ya just never know what we may need...
Why don't you spend a bit "O" time and make a list of all the stuff you might need for this project. And POST IT HERE..!!!!
At least if any of us has some extras we can bring em with us.
So what ya need?
C'Mon dude.. I have a storage full of parts. You will help me by helping you...
Twystd1
This sounds likea good time, but I can't make it.
Make sure to grab "the" cv joint tool. The "four square" thingy. If everyone brings one, you'll be sure to have one. If you don't have one, you just end up spending a bunch of money on beer and nuthin' gets done.
my .02.
OK I will compile a list, and see what you guy's can come up with.
I really appreciate all the support, advice, etc.
Thanks Twystd1
And thanks to Richard for the phone call and advice...
QUOTE (Twystd1 @ Oct 2 2005, 10:36 PM) |
I'm gunna bring my good old trusty RED tool box with me just for Shi%s and Grins... Ya just never know what we may need... Why don't you spend a bit "O" time and make a list of all the stuff you might need for this project. And POST IT HERE..!!!! At least if any of us has some extras we can bring em with us. So what ya need? C'Mon dude.. I have a storage full of parts. You will help me by helping you... Twystd1 |
Add one more to the list.
Bringing a lil floor jack, and uhhh.... well a floor jack.
These things are really easy, all the hard bolts have been covered thus far.
See everyone sat.
BJH
QUOTE (Crazyhippy @ Oct 3 2005, 08:53 AM) |
Add one more to the list. Bringing a lil floor jack, and uhhh.... well a floor jack. These things are really easy, all the hard bolts have been covered thus far. See everyone sat. BJH |
The Warden approved it (thanks dear), so i'm there.
It's a nice drive from Camarillo.
BJH
QUOTE (Crazyhippy @ Oct 3 2005, 09:11 AM) |
The Warden approved it (thanks dear), so i'm there. It's a nice drive from Camarillo. BJH |
NOTE TO Bmunday:
I'm in this for the food. I know nothing about cars.
I think Aaron is a fictional charachter of some guy named Skline.
The parts I have in my storage are for an Edsel.
I heard your cousin was hot.
My real name is Richard Simmons and I hang out at 914 events to feel important.
Twystd1
Hey... if you can order a battery tray from PP or HPH or wherever you can get one before Saturday..
Maybe someone will loan us a MIG and we can throw it in...
Anyone have a PORTABLE MIG 110VAC?????
Hey, bmunday,
Do you have the tools to grind and clean metal?
Do you have a compressor?
Do you have a cute neighbor chick that likes middle aged men?
(Don't even go there Slits)
Do your friends really call you Bmunday?
See ya on Saturday... WHAT TIME BRO?
And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up..
Just spoke to Skline. He might be coming also. I will let ya know whom I KNOW is coming on Friday.....
LateRZzzzz.
Twystd1
Well, my prior commitment for saturday is on. I'm helping fellow board member kdfoust install a flat six into his ride. I'm sure you guys will have enough folks to assist. I was REALLY looking froward to meeting a bunch of 914 guys. I'm on the bay window forum over at teh samba and we're all spread out across teh country. I never meet anyone...
Not to highjack or anything thing but...It did take 3 of us 6 + hours to get the engine out. The car had to be jacked up a rediculous amount to get everything to clear. The jacking by itself took 25 minutes! We had to cut pieces of wood to put under the jack stands and stack them safely ect. It probably took a good hour to unhook everything and do the labels too. ( L-jet).
If you guys can get it out in an hour, I'd like to know your technique. granted, we had never done this before but even I was amazed at how diffecult this job was!
I am thinking that you and Kevin should come over at least to watch. If I dont have to work, I will be there. I have dropped an engine and tranny in less than an hour by myself. As the locals will tell you, I had a lot of practice. If I can get my speedo drive gear fixed in the Chalon, I may drive it down, otherwise, it will be the truck and some parts for you. I know I have a good set of rear rotors here. I also have a few jacks and stands too. Tell Kevin (Kdfoust) to wait on his car and then we will all go over to his house and help him with his car. Is he doing the 6 in his green car? I was wondering what happened to him, he used to come out to all of our runs and events. Great guy. I may be working tonight which would put me in line to work again this weekend but maybe it will be Sunday and not Saturday. We will see.
QUOTE (Twystd1 @ Oct 3 2005, 11:25 PM) |
And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up.. |
-I dont exist, but your beer will disapear-
QUOTE (MattR @ Oct 4 2005, 07:58 AM) | ||
This is the second time in as many posts where the aadmin and scotty get mentioned in your post above me. Whats up dude!?! After all the things we've... done... this is what I get? Man, you're ugly. Me and the Mexican will be there. I'll run by Kragen and get some blinker fluid on my way... I'm sure we'll need it. |
QUOTE (Twystd1 @ Oct 3 2005, 11:25 PM) |
NOTE TO Bmunday: I'm in this for the food. I know nothing about cars. I think Aaron is a fictional charachter of some guy named Skline. The parts I have in my storage are for an Edsel. I heard your cousin was hot. My real name is Richard Simmons and I hang out at 914 events to feel important. Twystd1 Hey... if you can order a battery tray from PP or HPH or wherever you can get one before Saturday.. Maybe someone will loan us a MIG and we can throw it in... Anyone have a PORTABLE MIG 110VAC????? Hey, bmunday, Do you have the tools to grind and clean metal? Do you have a compressor? Do you have a cute neighbor chick that likes middle aged men? (Don't even go there Slits) Do your friends really call you Bmunday? :blink: See ya on Saturday... WHAT TIME BRO? And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up.. Just spoke to Skline. He might be coming also. I will let ya know whom I KNOW is coming on Friday..... LateRZzzzz. Twystd1 |
QUOTE (bmunday @ Oct 4 2005, 08:25 AM) |
No friends call me Bri or "B". |
Hopefully I didn't piss off Twystd...
QUOTE (MattR @ Oct 4 2005, 11:52 AM) | ||
Okay "B" See you saturday |
QUOTE (bmunday @ Oct 4 2005, 11:55 AM) | ||||
Hey Matt.. I was chceking out your Blog, are you driving your teen on Saturday? If not can you bring some more pics...? What color is that? It appears to be the same color as my truck, maybe a little darker, but I can't quite tell... Smoke Grey.. I like it.. |
Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members
So Clayton is special? special in the sense that he likes to experiment with power tools? Likes to play with fire, dresses in ways that would be considered strange?
QUOTE (MattR @ Oct 4 2005, 01:04 PM) | ||||||
No go on the teener for saturday. Its still on blocks... but not for much longer Its Seal Grey Metallic, the new porsche color you see on boxsters and stuff. I'll have it up and running someday, so you'll see it on a fun run or BBQ or something. Twystd1 gets pissed really easily, but whenever he goes off he makes this funny face that makes him look even UGLIER! So we all point and laugh at his expense... its part of the socal group. Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members |
Ok I ordered the battery tray and support from PP, should have them by Friday.
Anyone have a mig welder the might bring over Saturday? Might save me some cash insted of having Joe come over.. So I guess this makes me an official Cheap SOB?
QUOTE (Elliot Cannon @ Oct 4 2005, 01:39 PM) | ||||||||
Matts car will be ready about the time he graduates from school. So we'll all get to see his car in about 6 or 7 years. Considering he paid a wopping $400 for his paint job, I am really looking forward to seeing it. Cheers, Elliot |
QUOTE (Elliot Cannon @ Oct 4 2005, 01:39 PM) | ||||||||
Matts car will be ready about the time he graduates from school. So we'll all get to see his car in about 6 or 7 years. Considering he paid a wopping $400 for his paint job, I am really looking forward to seeing it. Cheers, Elliot |
he slept with the paint guy
QUOTE (Aaron Cox @ Oct 4 2005, 03:02 PM) |
he slept with the paint guy |
QUOTE (Headrage @ Oct 4 2005, 02:07 PM) | ||
Paint guy |
i can bring a 110 mig and grinders assuming they fit into the teen....
BJH
QUOTE (Crazyhippy @ Oct 4 2005, 04:05 PM) |
i can bring a 110 mig and grinders assuming they fit into the teen.... BJH |
QUOTE (Crazyhippy @ Oct 4 2005, 03:05 PM) |
i can bring a 110 mig and grinders assuming they fit into the teen.... BJH |
QUOTE (bmunday @ Oct 4 2005, 04:34 PM) | ||
Perfect!!!! Thanks Hippy.. I need to mount the battery tray, and support, and there is a small holes that needs repair. I will take a couple of pics later tonight of the holes and see what you guy's think... |
QUOTE (Aaron Cox @ Oct 4 2005, 03:39 PM) | ||||
i have some 18 gauge sheetmetal i can bring.. 1'x1' or so... maybe its 20 GA... hmmmm |
QUOTE (Headrage @ Oct 4 2005, 06:07 PM) | ||
Paint guy |
I resent what someone said... cept I forgot what they said. I R old and don't know 2 much sometimes.
Right on about the welder... Good show..!!!!!!!!
Do ya need rotors or brakes? I have some cores for each. Do ya need any small parts? let me know...
Who is bringing the CV tool? Brando?
Note to bmunday.. DON'T have everything ripped out of the car before we get there.
There won't be anything to do ..!!!!!!!!!!!!!!!!!!!
Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!!
Yo, B
I'll see ya arounf 9:30 sat. morning.... Might bring a woman to keep us company...
Oh... never mind.. MattR is coming.....
Twystd1
young guys my ass... Why I outa.....................
QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM) |
Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!! |
QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM) |
Might bring a woman to keep us company... |
QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM) |
Oh... never mind.. MattR is coming..... :owned: |
I happen to have brandoholios CV tool at mi casa....
i can bwing it....
and the piece of metal i got. we could fab up brians stuff and be done in an hour
AA
QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM) |
I resent what someone said... cept I forgot what they said. I R old and don't know 2 much sometimes. Right on about the welder... Good show..!!!!!!!! Do ya need rotors or brakes? I have some cores for each. Do ya need any small parts? let me know... Who is bringing the CV tool? Brando? Note to bmunday.. DON'T have everything ripped out of the car before we get there. There won't be anything to do ..!!!!!!!!!!!!!!!!!!! Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!! Yo, B I'll see ya arounf 9:30 sat. morning.... Might bring a woman to keep us company... Oh... never mind.. MattR is coming..... Twystd1 young guys my ass... Why I outa..................... |
GOD... I do so love this place they call the 914Club......
I will see if there is any wild game left at Bills and Phils...
If so... I will bring it along......
If not... No Cigar....
Twystd1
Engine stand not needed. (They are nice to have though)
A CLEAN bench for assembly is needed.
For dissasembly.. A kinda clean bench is needed.
For Aaron... a small bench is needed...........
Twystd1
So.. 10 am....
by 11, or 11.30, we should have an engine out, some battery trays welded in..... and some beer and bbq in the system?
whats next?
QUOTE (Aaron Cox @ Oct 4 2005, 07:22 PM) |
So.. 10 am.... by 11, or 11.30, we should have an engine out, some battery trays welded in..... and some beer and bbq in the system? whats next? |
QUOTE (bmunday @ Oct 4 2005, 07:32 PM) |
I would like to drive the car before I retire though. |
QUOTE (Crazyhippy @ Oct 4 2005, 07:44 PM) | ||
So much for the pull your motor party then.... once a 914 gets comfortable on jackstands... it's done for |
Ok here are a couple of pics justtook them. Not the greatest, kinds dark, but will give it a shot anyway.
Rotor, is this bad???? I wonder how long he ran without new pads...
Picture on the stands...Hell hole small rust damageon the inner panels.
Attached thumbnail(s)
on stands Hopefully it wont get to uuse to it.
Attached thumbnail(s)
Is this bad???? Man sweetrotor damage...
Attached thumbnail(s)
YYeeeks... it's done for..
I'll give ya 300 bucks for the whole car......
Ok, Ok, Ok, It's fixable... By anyone other than me. I just talk and act interested.
Looks like if Skline can show up he can give ya some pointers on the rust repair.
Skline IS the real deal.. He welds up and fixes stuff I woulda trashed or given up on.
And it looks spot on.. (unless Aaron helps)
Looks like a good time. Sounds like 10 guys will be there.
Lets see... At 1.5 Lbs of steak per 10 guys. Plus bri's family.. Hmmm That equals 49 Lbs of Prime Steaks. Plus .. Let's see.. 10 guys times 30 beers equals 300 beers plus Bri's family equals 534 beers and two bottles of water for me.....
Dude... you should get this engine pulled for a little under a grand..!!!!
Crap I forgot about the potato salad... Make that a bit over a grand.
OhCrap... I forgot about the shrimp cocktail.... equals 130.00 USD Plus.........
Fugit... Cook burgers......
Twystd1
That rotor is wasted. I have a set here you can have, they will be with me when we get there. If I cant make it, I will give them to Aaron or Clayton and they can bring them down. I may have to work on Saturday. I wont know till Friday night though.
The rust in the engine compartment really isn't that bad. Well I don't think so... THe holes are actually smaller then they appear. The rotos are nothing. Need replacement, just thought it was funny how bad they appear.
Shit I beeter go take out an equity loan to pay for beer...
QUOTE (skline @ Oct 4 2005, 09:00 PM) |
That rotor is wasted. I have a set here you can have, they will be with me when we get there. If I cant make it, I will give them to Aaron or Clayton and they can bring them down. I may have to work on Saturday. I wont know till Friday night though. |
QUOTE (skline @ Oct 4 2005, 07:03 AM) |
I am thinking that you and Kevin should come over at least to watch. If I dont have to work, I will be there. I have dropped an engine and tranny in less than an hour by myself. As the locals will tell you, I had a lot of practice. If I can get my speedo drive gear fixed in the Chalon, I may drive it down, otherwise, it will be the truck and some parts for you. I know I have a good set of rear rotors here. I also have a few jacks and stands too. Tell Kevin (Kdfoust) to wait on his car and then we will all go over to his house and help him with his car. Is he doing the 6 in his green car? I was wondering what happened to him, he used to come out to all of our runs and events. Great guy. I may be working tonight which would put me in line to work again this weekend but maybe it will be Sunday and not Saturday. We will see. |
QUOTE (Twystd1 @ Oct 2 2005, 10:36 PM) |
I'm gunna bring my good old trusty RED tool box with me just for Shi%s and Grins... Ya just never know what we may need... Why don't you spend a bit "O" time and make a list of all the stuff you might need for this project. And POST IT HERE..!!!! At least if any of us has some extras we can bring em with us. So what ya need? C'Mon dude.. I have a storage full of parts. You will help me by helping you... Twystd1 |
QUOTE (bmunday @ Oct 4 2005, 08:50 PM) |
Is this bad???? Man sweetrotor damage... |
QUOTE (V6914 @ Oct 5 2005, 06:25 PM) | ||
Just have them Wide Arch Welded, then Turned, they'll be as good as new |
Yo Bri,
I B there at tween 9:30 and 10:oo AM.
I bring the Skline or Vice a Versa if he no worky....
I tink I have rotors also.. i have to Mic em first to see if they be OK...
What size engine do ya have.. I forgot... And what part of the exhaust do you need?
And why are we pulling the engine out.. i forgot. I don't think you said why in this thread.... Then again..........
If ya wanna strip the paint... I suggest lotsa liquid stripper and visqueen.
I'll show ya how I do it.. It worked for Scott. Will probably work for you...
Saw MattR tonight. He said he's gunna wear his blue G string for the occasion..
Dam kids... Don't they know yellow is faster?
See ya Saturday..
Twystd1
QUOTE (Twystd1 @ Oct 6 2005, 02:25 AM) |
Yo Bri, I B there at tween 9:30 and 10:oo AM. I bring the Skline or Vice a Versa if he no worky.... I tink I have rotors also.. i have to Mic em first to see if they be OK... What size engine do ya have.. I forgot... And what part of the exhaust do you need? And why are we pulling the engine out.. i forgot. I don't think you said why in this thread.... Then again.......... If ya wanna strip the paint... I suggest lotsa liquid stripper and visqueen. I'll show ya how I do it.. It worked for Scott. Will probably work for you... Saw MattR tonight. He said he's gunna wear his blue G string for the occasion.. Dam kids... Don't they know yellow is faster? See ya Saturday.. Twystd1 |
Please let me know if we need any more tools or welders. I can bring anything that we need.
I will be there on Sunday.
Also.. let me know if we need any parts. I can get/bring anything we need at cost.
B
I'm going to be in the area and will stop by
QUOTE (Brad Roberts @ Oct 6 2005, 06:50 AM) |
Please let me know if we need any more tools or welders. I can bring anything that we need. I will be there on Sunday. Also.. let me know if we need any parts. I can get/bring anything we need at cost. B |
QUOTE (jim_hoyland @ Oct 6 2005, 06:59 AM) |
I'm going to be in the area and will stop by |
OK here is who I count as of today 10-6-05.
If I missed anyone let me know. Just want to make sure I got enough food and drink.
Brandon
Aaron
Alberto
Richard S.
Elliot (maybe) If he can wake up after flying around the world..
Brad R.
Crazy Hippy
Scott Kline
Matt R
Richard V619 (possible)
Jim H.
Hope everyone can make it, I need the advice, and I gives me a good excuse to have a few beers... (With this group, I think a few is an understatement)
So is it Saturday or Sunday? Brad said he would be there on Sunday and Clayton said he would see you on Saturday. I may have to work on Sunday but I just never know when for sure till the day before and even then sometimes I still dont know for sure.
QUOTE (skline @ Oct 6 2005, 08:50 AM) |
So is it Saturday or Sunday? Brad said he would be there on Sunday and Clayton said he would see you on Saturday. I may have to work on Sunday but I just never know when for sure till the day before and even then sometimes I still dont know for sure. |
Cool, I am almost positive I wont be working on Saturday, Matt sent me a PM asking if I could pick him up on my way down so that will most likely be happening also. I will bring those rotors with me and if you can think of anything else you might need that I may have here list it here and I will see what I can do.
QUOTE (skline @ Oct 6 2005, 09:26 AM) |
Cool, I am almost positive I wont be working on Saturday, Matt sent me a PM asking if I could pick him up on my way down so that will most likely be happening also. I will bring those rotors with me and if you can think of anything else you might need that I may have here list it here and I will see what I can do. |
QUOTE (kdfoust @ Oct 4 2005, 10:18 PM) | ||
Hey Scott. Kevin here. Yup, 3.2-6 into the green car. The engine is here. No f'n waiting on this -6 conversion. I've been messing around with engines for this car too long already. I already got the crew lined up. Three of "the crew," will kick my a** if I don't get this engine in the car post-haste! See ya round, Kevin |
I'm good for Saturday also. I was reading his topic when I posted that. I didnt read through all the posts (I'm a sorry sack of sh_t and I didnt really care who was showing up..LOL)
B
I'm having a BoxsterS engine delivered to the "Engine Party" can I get some help unloading and loading it into my truck? I have lifted them in the past with 3 people. 4 would be safer (I think Mueller threw his back out that time.. )
B
QUOTE (Toast @ Oct 6 2005, 10:55 AM) | ||||
Whole Sheeeeiiiittt !! The aliens dropped you back off!! Hi Kevin!! |
QUOTE (Brad Roberts @ Oct 6 2005, 12:49 PM) |
I'm having a BoxsterS engine delivered to the "Engine Party" can I get some help unloading and loading it into my truck? I have lifted them in the past with 3 people. 4 would be safer (I think Mueller threw his back out that time.. ) B |
QUOTE (Brad Roberts @ Oct 6 2005, 11:49 AM) |
I'm having a BoxsterS engine delivered to the "Engine Party" can I get some help unloading and loading it into my truck? I have lifted them in the past with 3 people. 4 would be safer (I think Mueller threw his back out that time.. ) B |
Is this thing stock injected or carbed?
I need to make him a decent list of parts.
B
I didn't respond because I thought it was a definite no go for me but now it's a possibility.
I'll know tomorrow.
QUOTE (Headrage @ Oct 6 2005, 04:01 PM) |
I didn't respond because I thought it was a definite no go for me but now it's a possibility. I'll know tomorrow. |
QUOTE (Headrage @ Oct 6 2005, 03:01 PM) |
I didn't respond because I thought it was a definite no go for me but now it's a possibility. I'll know tomorrow. |
I, won't make it sat, I'am working, have to support my habit, I'll come by after all the work, is all done,
I'll, have to turn over the Club's KIDDS Supervision, over to a Senior Club member, one that won't spare the Rod, one that actually enjoys using the Rod, his thinking is, if they havn't done anything wrong, they will, sooner or later they will, and he likes to get way ahead of them, he likes to get it niped in the but, before they go bad.
Oh, and by the way:
The battery tray and the rear deck lid don't count
QUOTE (V6914 @ Oct 6 2005, 05:19 PM) |
I, won't make it sat, I'am working, have to support my habit, I'll come by after all the work, is all done, I'll, have to turn over the Club's KIDDS Supervision, over to a Senior Club member, one that won't spare the Rod, one that actually enjoys using the Rod, his thinking is, if they havn't done anything wrong, they will, sooner or later they will, and he likes to get way ahead of them, he likes to get it niped in the but, before they go bad. |
QUOTE (bmunday @ Oct 4 2005, 09:05 PM) |
The rust in the engine compartment really isn't that bad. Well I don't think so... THe holes are actually smaller then they appear. The rotos are nothing. Need replacement, just thought it was funny how bad they appear. Shit I beeter go take out an equity loan to pay for beer... |
Update: I should be bringing a pair of boobs with me, my old roommate (Rhonda).
She likes to get dirty with cars
QUOTE (bmunday @ Oct 6 2005, 07:24 AM) |
OK here is who I count as of today 10-6-05. If I missed anyone let me know. Just want to make sure I got enough food and drink. Brandon Aaron Alberto Richard S. Elliot (maybe) If he can wake up after flying around the world.. Brad R. Crazy Hippy Scott Kline Matt R Richard V619 (possible) Jim H. Hope everyone can make it, I need the advice, and I gives me a good excuse to have a few beers... (With this group, I think a few is an understatement) |
QUOTE (bmunday @ Oct 6 2005, 08:53 PM) | ||
Ok I think Rhonda makes 12? Sounds about right... Ok I have enough beer, and I think enough food. Who the hell wants to cook? I want o learn about the car. You guy's better not stiff me.... If I got to eat burgers for the next three weeks, I'm comin for ya.... |
QUOTE (Aaron Cox @ Oct 6 2005, 07:57 PM) | ||||
and clayton (twystd1) |
Should I show up drifting through turns, breaking the tires in 2nd wearing my helmet like the last major BBQ?
HAHAHAHAHA
or you could take it to a shop and save a couple hundred!!!
QUOTE (Brando @ Oct 6 2005, 08:05 PM) |
Should I show up drifting through turns, breaking the tires in 2nd wearing my helmet like the last major BBQ? |
you think this is huge?
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=26073&st=0&hl=party
Man thats a lot of helpers! It should be a good time ( if you actually get anything done!) I'm brand new here but I must say that I'm quite impressed by the support you guys show each other. Over in the bay window forum of the Samba (my other addiction...) it's more or less the same thing except we're all spread out across the country. Have fun ya'll and we'll be thinking of you as we slide kdfoust's 911 engine into his 914 on Saturday!
bottomend
OK,,, So I'm a little fuCced up here...
We can't have this shindig without the Infamous SLITS..
It just wouldn't be right.
Slits... Do I have to come and get you?
or is Aaron gunna drag you out by your whiskers...
Cause ya gotta show... Hell, Skline and I need somebody uglier than us to be there... ya know what I mean?
And Bmunday hasn't even had a chance to make fun of your advanced age and knowledge of how you came to design the first Pyramids in Egypt...
So you in? And where the hell is Toast?
Twystd1
damn.... Wish i lived down south all the fun happens down there
QUOTE (Aaron Cox @ Oct 6 2005, 09:32 PM) |
you think this is huge? http://www.914world.com/bbs2/index.php?act=ST&f=2&t=26073&st=0&hl=party |
If anyone has an extra set of heat exchngers sitting around going to waste, I could use them.. Give me a price and we can talk. I don't need them right away, but hopefuly in the enxt month or two. Actually the entire exhaust system is rusted...
50 people showed to that one
QUOTE (Aaron Cox @ Oct 7 2005, 07:22 AM) |
50 people showed to that one |
Here is what I have... This sound about right.... Got the beer and food last night..
Brandon
Rhonda (One of Brandons harum)
Aaron
Alberto
Richard S. Twystd1
Elliot (maybe) If he can wake up after flying around the world..
Brad R.
Crazy Hippy
Scott Kline
Matt R
Headrage (possible)
Jim H.
I hear about this "Z" guy. I have seen picstures.. Would be interested in metting this guy. He appears to be entertaining. A little off balance, but there are many of those on this board. If your interested in showing "Z" have at it. I will just hide the live stock..
Just a thought....
I don't have a lot of chairs, with this many people I'm sure there will be s few that want to sit. If you have a beach chair, or a colapsable one, you might want to bring it along. I hope after the work is done some of you will hang out and B.S. want to make sure you don't have to sit on the floor or ground... Your choice.
Thanks again for all the great support, this group is Awesome!!
QUOTE (bmunday @ Oct 7 2005, 08:38 AM) |
Here is what I have... This sound about right.... Got the beer and food last night.. Brandon Rhonda (One of Brandons harum) Aaron Alberto Richard S. Twystd1 Elliot (maybe) If he can wake up after flying around the world.. Brad R. Crazy Hippy Scott Kline Matt R Headrage (possible) Jim H. I hear about this "Z" guy. I have seen picstures.. Would be interested in metting this guy. He appears to be entertaining. A little off balance, but there are many of those on this board. If your interested in showing "Z" have at it. I will just hide the live stock.. |
QUOTE (skline @ Oct 7 2005, 11:27 AM) | ||
Richard said he couldnt be there however he is very twisted he is not Twystd1, that would be Clayton. I for sure will be there as I am working at the port tonight. That means I will be asleep most of the time I am there tomorrow but my body will be there and part of my mind which is more than most who will show. I am getting ready to eat my lunch now, today I have preparred a nice Harris Ranch Rib Eye cooked medium well and oh so tasty. See you all tomorrow. |
It just takes a little time, it will help when you meet them all. As for Z, I have not seen him post for a few days, not sure what happened to him. Dont tell anyone, but to tell you the truth, he is actually a nice guy with a family and everything, what you see here is just a cover, he doesnt want anyone to really get to know him.
QUOTE (skline @ Oct 7 2005, 11:45 AM) |
It just takes a little time, it will help when you meet them all. As for Z, I have not seen him post for a few days, not sure what happened to him. Dont tell anyone, but to tell you the truth, he is actually a nice guy with a family and everything, what you see here is just a cover, he doesnt want anyone to really get to know him. |
SLITS makes a killer hamburger!
If he doesn't show up for this, then you should make it down to the D&G swapmeet in Riveside on Oct. 23rd.
brian - ill be bringing some extra TALL 6 ton jackstands, a CV tool, and taht piece of sheetmetal
QUOTE (Aaron Cox @ Oct 7 2005, 01:42 PM) |
brian - ill be bringing some extra TALL 6 ton jackstands, a CV tool, and taht piece of sheetmetal |
QUOTE (bmunday @ Oct 7 2005, 11:22 AM) |
Just a thought.... I don't have a lot of chairs, with this many people I'm sure there will be s few that want to sit. If you have a beach chair, or a colapsable one, you might want to bring it along. |
QUOTE (Dead Air @ Oct 7 2005, 03:47 PM) | ||
[QUOTE] And bring your own Beer!! |
Room for one more?
I've never dropped an engine but hope to do it someday. I'd love to hang out and watch how it’s done. Plus, how often you get so many 914 experts in one place within driving distance?
I've had idle problems, the hoses on my deceleration valve keep collapsing, and I think she runs hot. It's been a while since I felt comfortable driving more than 30 miles from home. For this, I’ll push it. I'm hoping with this many eyes and ears someone may be able to steer me in the right direction.
I promise not to be needy newbie, and I'll bring beer.
I totally understand if you’re full. If so, I'll catch the next one.
Let me know.
Thanks.
Tom
QUOTE (skline @ Oct 7 2005, 12:45 PM) |
As for Z, I have not seen him post for a few days, not sure what happened to him. Dont tell anyone, but to tell you the truth, he is actually a nice guy with a family and everything, what you see here is just a cover, he doesnt want anyone to really get to know him. |
QUOTE (VWnDRAG @ Oct 7 2005, 05:05 PM) |
Room for one more? I've never dropped an engine but hope to do it someday. I'd love to hang out and watch how it’s done. Plus, how often you get so many 914 experts in one place within driving distance? I've had idle problems, the hoses on my deceleration valve keep collapsing, and I think she runs hot. It's been a while since I felt comfortable driving more than 30 miles from home. For this, I’ll push it. I'm hoping with this many eyes and ears someone may be able to steer me in the right direction. I promise not to be needy newbie, and I'll bring beer. I totally understand if you’re full. If so, I'll catch the next one. Let me know. Thanks. Tom |
Crappy news... I got the walk-through on my apartment tomorrow at 9AM; I have to be there at 8AM just to throw the remaining furniture away. I hopefully will be there before 11AM, sans Rhonda. But with Toast, Clayton's friend (forgot her name) and Aaron+Matt, 3 pairs of boobs should be plenty.
QUOTE (Brando @ Oct 7 2005, 07:56 PM) |
Crappy news... I got the walk-through on my apartment tomorrow at 9AM; I have to be there at 8AM just to throw the remaining furniture away. I hopefully will be there before 11AM, sans Rhonda. But with Toast, Clayton's friend (forgot her name) and Aaron+Matt, 3 pairs of boobs should be plenty. |
I'm leaving Camarillo @ 8am headed down the 101 to the 405 to the 5 in a Yellow teen.
I have a seat open if someone needs a ride (no fatties, it's only a 1.7 )
See yall in the AM
BJH (805)216-0333
QUOTE (VWnDRAG @ Oct 7 2005, 05:05 PM) |
Room for one more? I've never dropped an engine but hope to do it someday. I'd love to hang out and watch how it’s done. Plus, how often you get so many 914 experts in one place within driving distance? I've had idle problems, the hoses on my deceleration valve keep collapsing, and I think she runs hot. It's been a while since I felt comfortable driving more than 30 miles from home. For this, I’ll push it. I'm hoping with this many eyes and ears someone may be able to steer me in the right direction. I promise not to be needy newbie, and I'll bring beer. I totally understand if you’re full. If so, I'll catch the next one. Let me know. Thanks. Tom |
QUOTE (Aaron Cox @ Oct 7 2005, 08:04 PM) | ||
see ya at 11 |
Booby's ???
I'm thinking about coming SOLO......
Does that mean Scott has to be my date?
Never mind... maybe Slits wil show up....
See ya at 10:00 AM.. I have to go to a morning meeting...
(At Turners to get my new rifle )
Note: I will be unarmed for this event.
Twystd1
QUOTE (Twystd1 @ Oct 7 2005, 09:45 PM) |
Booby's ??? I'm thinking about coming SOLO...... Does that mean Scott has to be my date? Never mind... maybe Slits wil show up.... See ya at 10:00 AM.. I have to go to a morning meeting... (At Turners to get my new rifle ) Note: I will be unarmed for this event. Twystd1 |
YEAH!!!!!!!!!!!!!!!!!!!!!!!!!!
Dude.. have ya driven it around the block yet... Does it work?
Twystd1
Ok, well, I just got home from working at the port. They kept us longer to finish up the ship. I am off to sleep now, should be up around 9:30 or so. See you all later this morning.
QUOTE (skline @ Oct 8 2005, 03:29 AM) |
Ok, well, I just got home from working at the port. They kept us longer to finish up the ship. I am off to sleep now, should be up around 9:30 or so. See you all later this morning. |
Im back... earlier than i wanted...but such is life.
In attendance...
Skline
Elliot Cannon
Mattr
Twystd1
Joe Sharp
one914racer
Aaron Cox
Brad Roberts
Crazy Hippy (BJ)
VwnDrag (tom)
Brando
Lagunero
Bmunday
Jim Hoyland
i prob. forgot someone... old age and all....
Pics
-engine from above... pre op...er...pre drop-
the GRAND CANYON of rotors...as brad said. grooves prolly a .007 or so... maybe more
how many idiots to drop a 914 motor and trans? give them food after the work is done! LOL
hangin out....
All the help you need.... brad and BJ...
The second string players.....
what are they thinking???
BJ on hell hole repair duty....
BJ is still welding and we're still sitting around
alberto
LMAO... he should be nearly done...
BJ is seriously damn good at that hell hole repair. Dude was cutting strips and has them welded in near perfect! Just a bit of grinding and paint and bmunday's hell hole a-la passenger side should be fixed Just leaves driver's side.
Rock on!
Getting started
Attached image(s)
Got it out
Attached image(s)
BJ taking a well deserved break. By far the hardest worker there today. Grinding, welding and grinding. Good job BJ!!
Attached image(s)
BJ at work on the hell hole. Grinding, welding and grinding.
Attached image(s)
Engine on the work bench. Would you believe the bed of Brians truck?
Attached image(s)
Lunch break. Clayton (Twisted1), Brad, SKlein, Albert (Lagunero), MattR, Aaron.
Attached image(s)
do you spell elliotttttt cannon with two Ns or one N?
A couple friendly neighbors.
Attached image(s)
QUOTE (Elliot Cannon @ Oct 8 2005, 08:40 PM) |
A couple friendly neighbors. |
QUOTE (Brando @ Oct 8 2005, 08:38 PM) |
do you spell elliotttttt cannon with two Ns or one N? |
QUOTE (Elliot Cannon @ Oct 8 2005, 08:40 PM) |
A couple friendly neighbors. |
Much thanks to the Munday family for their generous hospitality. Lunch was so good we've all decided that we want to make this a weekly thing.
Cheers, Elliot
QUOTE (Elliot Cannon @ Oct 8 2005, 08:47 PM) |
Much thanks to the Munday family for their generous hospitality. Lunch was so good we've all decided that we want to make this a weekly thing. Cheers, Elliot |
QUOTE (Elliot Cannon @ Oct 8 2005, 07:47 PM) |
Much thanks to the Munday family for their generous hospitality. Lunch was so good we've all decided that we want to make this a weekly thing. Cheers, Elliot |
Brian, you've got a wonderful home and family! We definitely hope we're welcome back.
QUOTE (Brando @ Oct 8 2005, 08:22 PM) |
Brian, you've got a wonderful home and family! We definitely hope we're welcome back. |
made it home safe and sound...
Had a moron driving a suburban try to kill me in calabasas.. didn't tie his suitcase on well enough and the wind threw it at me Great way to go from to to 914's slalom skills were put to good use, and i didn't hit anything Not so sure about the cars behind me, somone might have ended up starting a long night
Great to meet everyone, good grub, good peeps, and 914's, hell of a way to spend a saturday.
BJH
Those of you that left early missed Brad the BMX king.. He didn't take the ramp... Kids down the street tried to call him out, but he wouldn't give in... Here is a little clip of his hidden talent..
Can someone tell me why I am receiving an error message while trying to upload the video clip?
THis is classic..
THE FOLLOWING ERROR(S) WERE FOUND
--------------------------------------------------------------------------------
You cannot upload this type of file
Everyone working hard..... Especially Brad Someone had to hold the chip bowl...
Albert, Brandon, Matt, Brad.. and Twystd1's ear...
Attached thumbnail(s)
A-RON... Hard at work. Thanks for coming over to give a hand. Great guy... :trophy
Attached thumbnail(s)
Brad and I left at about 9:00 PM.... we closed up shop and took off home...
I just have to thank to Bmunday for the eats and the good times. Dude.. you have an absolutely incredible family. Good Kids, Wonderful wife (and cute!!), plus a sombitch of a 914.....
Bri, you and your teener were the catalyst of many fun things today.
This was one of the best times I have had with the SoCal Contingent.
Was fun to meet the Bradster and find out he is even uglier than what Aaron said.
Saw Elliot Cannon actually get dirty when he accidently touched a wrench
Saw Skline half fall asleep through the madness.
Saw MattR actually understand for the first time how a screwdriver works.
Saw a man named BJ fabricate and weld his ass off... Amazing tenacity.
Actually saw Albert say something nice to MattR... (accident... I'm sure)
And there were many more people that showed up huge and participated in this wonderful ritual of helping another 914 owner out.
Bottom Line... 914 club members in this neck of the woods are some of the best people on earth.
What a gift......
Twystd1
Thanks Brad for checking the steering alignment on Kyle's ride..
Attached thumbnail(s)
QUOTE (Twystd1 @ Oct 8 2005, 09:37 PM) |
Saw MattR actually understand for the first time how a screwdriver works. |
BJ (Crazyhippy) working again. The guy is like a machine. non-stop!!!
Attached thumbnail(s)
QUOTE (bmunday @ Oct 9 2005, 01:44 AM) |
Sorry so many indivdual posts SirAndy... I am trying to load all pics on one post, but can't figure it out.. Everyone wondereds what Elliot does on his trips to Shanghi? Well here it is.. |
That's me beging told jusy how much trouble I was rally in.. What did I get myself into.... ( alsopictureres Matt,Scott, Brad, Adam, and the small one is Kyle, My son, Future 914 owner. Loves them as much as I do)
Attached thumbnail(s)
So MattiasR... Duth thou hast an issue regarding the forlorn scewage of driver?
Ist thouswanton to place said scewage of proverbial driver is thouest bungholio?
Ye shall sloweth thee down and speaketh to Sir Aaron of Long Beach for mediation and calming influence..
Twystd1
Aaron Cox, twystd19 (Claytond), VWNDRAG (Tom), & Jim Holyland (in the background) (sweet teener Jim, I still like the color of it..
Attached thumbnail(s)
Clayton (twystd1) Prepping thhe engine to be cleaned. Don't know what got more water logged, him or the motor...
(He's a cleaning machine)
Attached thumbnail(s)
Brandon: (Brando) the ladies man......Gotta work on the pick up line man....
Attached image(s)
Brian,
Had a great time, great project, and great company...Can't wait to see the finished car.
BJ's Future apprentice... (My son Kyle, futuer owner of this car)
Attached image(s)
QUOTE (jim_hoyland @ Oct 9 2005, 06:20 AM) |
Brian, Had a great time, great project, and great company...Can't wait to see the finished car. |
Another picture of the hardest working guy BJ...
Attached image(s)
Brian thanks a bunch for having us over. Wonderful family, great food and a garage that you could actually walk around in. It was a great time.
QUOTE (lagunero @ Oct 9 2005, 06:31 AM) |
Brian thanks a bunch for having us over. Wonderful family, great food and a garage that you could actually walk around in. It was a great time. |
Sorry for posting so late. No web access from home..
I had a blast. Good to see everyone again. We need to help Brian put together a plan for the engine/tranny/body stuff.
Brian,
Your wife and family are awesome. The kids were great. It is very rare in this day and age that you find children who actually want to work on things You have a couple of great sons.
Now.. about your sister...LOL
B
QUOTE (Brad Roberts @ Oct 10 2005, 08:50 AM) |
Sorry for posting so late. No web access from home.. I had a blast. Good to see everyone again. We need to help Brian put together a plan for the engine/tranny/body stuff. Brian, Your wife and family are awesome. The kids were great. It is very rare in this day and age that you find children who actually want to work on things :clap: You have a couple of great sons. Now.. about your sister...LOL B |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)