Printable Version of Topic

Posted by: Justin Fischer Feb 10 2003, 01:09 PM

I was going through a box of parts this weekend, and I came across these metal tubes. I don't have anything like this on my car, and I can't read the first three digits to determine if they are 911 or 914 parts. Anyone know?

Thanks,
Justin

Posted by: Dave_Darling Feb 10 2003, 01:13 PM

Heater elbows from a 70-74 four-cylinder 914. They go from the heat exchanger outlet to the flapper valve.

--DD

Posted by: Bleyseng Feb 10 2003, 01:16 PM

Wow, they aren't rusted out nor do they have the Porsche rustproofing-1/2" of rockhard oilygrime.
Geoff

Posted by: Justin Fischer Feb 10 2003, 01:23 PM

Wow, that was fast. Thanks Guys.

Justin

Posted by: ChrisReale Feb 10 2003, 01:23 PM

Are those still available new?

Posted by: Bleyseng Feb 10 2003, 01:50 PM

Yes, from AA as they thought they had the last two! Now Justin has 'em.
Geoff

Posted by: Justin Fischer Feb 10 2003, 01:57 PM

Posted by: Justin Fischer Feb 10 2003, 02:00 PM

I found a few other things the Dr. might be interested in:

Posted by: Justin Fischer Feb 10 2003, 02:01 PM

Another:

Posted by: Justin Fischer Feb 10 2003, 02:01 PM

Last one:

Posted by: Bleyseng Feb 10 2003, 02:09 PM

Ok, what the hell is the last picture of?
Geoff

Posted by: Aaron Cox Feb 10 2003, 02:09 PM

unlike what seems to be everyone else, have never had a problem in the 2 times that I shopped there at AA. Have hard to find parts. Cool! precut dash upholstery and door vents.

Posted by: Justin Fischer Feb 10 2003, 02:10 PM

Last picture is the front Tow Eye.

Posted by: Aaron Cox Feb 10 2003, 02:10 PM

Front recovery hook?

Posted by: Bleyseng Feb 10 2003, 02:12 PM

Nah! only has one hole unless that is the replacement version.
Geoff

Posted by: Justin Fischer Feb 10 2003, 02:15 PM

I think you only see one hole after the hook is welded to the pan.

Justin

Posted by: SirAndy Feb 10 2003, 02:20 PM

i like those vent covers
are they for sale?

Andy

Posted by: Bleyseng Feb 10 2003, 02:21 PM

I just did one and it didn't have two holes just the big one for the hook. The flat part where that second hole is, that is where it is spot welded to the trunk pan. I took a good one off a junk piece to weld onto my new trunk floor.
Geoff

Posted by: Justin Fischer Feb 10 2003, 02:28 PM

You can see the hook in this parts diagram, and it has two holes. I wonder if they changed the design at some point.

http://www.pelicanparts.com/914/Parts/Body/frame_front_big.htm

Andy - Sorry, but I'm going to hang onto the dash pieces, vents, and tow eye for now. If I decide to sell them I will let you know.

Justin