I'm about to start a complete rebuild and thorough cleaning on my IDF's and have a question. Gas is flowing out of the accelerator pump nozzles on one carb at idle without pumping the accelerator and would like to know if any could tell me what to look for during the rebuild. I did change the gaskets and pump diaphram but the nozzles still leak at idle.
Thanks in advance,
Dominic
The leaking could be due to a needle valve sticking open or the float level needs to be set.
KT
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)