Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Axle Boot Replacement

Posted by: Howie's 914 Nov 1 2005, 08:12 PM

Ok, My baby is at the body shop till next year I am sure. So I have started working on other parts. I have taking off the outer clip but I still can not get the bearings off to clean them and repack them with grease. Is there a trick to this?

Thanks

Posted by: trekkor Nov 1 2005, 08:18 PM

Use a brass punch and a small hammer to work it off.
Work in a circle. takes about five minutes

KT

Posted by: SirAndy Nov 1 2005, 08:21 PM

and be sure you ONLY hit on the inner race, otherwise, your CV will be toast ...

Andy