Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Zenith rebuild

Posted by: thesey914 Nov 5 2005, 11:12 AM

Anybody know how to remove the venturi like this?
Does it just pull out or is it bolted/screwed? Mine are Very tight if they just pull
One of the venturis has kinda melted...must've been on fire at some point.
user posted image

Posted by: Jeroen Nov 5 2005, 12:17 PM

can't help ya, but I'll give ya a

Posted by: thesey914 Nov 5 2005, 12:19 PM

Thanks Jeroen

Posted by: Eric_Shea Nov 5 2005, 01:09 PM

That's not a venturi but they both should pull out.

Posted by: thesey914 Nov 5 2005, 01:33 PM

Thanks Eric,
I beg to differ...it is a venturi

Posted by: Eric_Shea Nov 5 2005, 01:37 PM

OK... got me there. It's the secondary. What "most" of us think of as a venturi is the "main" venturi, which I thought you were posting about.

Posted by: Eric_Shea Nov 5 2005, 01:48 PM

That secondary may have clips at the top but they shouldn't hinder you from pulling it straight up. You may want to look for clips (I've rebuilt both Weber and Zeinith and I don't remember the clips situation). The clips kinda go in the square area next to the bore for the secondary.

Don't know if that helps...