I removed the fuel tank last night to replace it and purchased a sway bar to install while I have it removed. Also going to install a 19mm master brake cylinder while I have access to the brake fluid feed lines and some general clean-up and POR-15 some surface rust spots - anything else I should do while I am in there and have the fuel tank removed?? Messing around with teh fuel and draining the tank is not something I want to do twice?
Thanks
If you were thinking of replacing the fuel lines up the tunnel now would be the time.
KT
QUOTE (trekkor @ Nov 23 2005, 05:36 AM) |
If you were thinking of replacing the fuel lines up the tunnel now would be the time. KT |
Are you feeling feverish? It's begining to sound like a case of DWD
relocate teh fuel pump to the front
check your defrost/ventilation blower
windshield hasher system
I just did all this stuff, here's how
http://www.914world.com/specs/tech_fuellines_ss.php?PHPSESSID=e55f0325f09a99fd3f7071cbbf310d4d
I ran a guide wire through my lines, then removed teh plastic while keeping the guide wire in place
PS. thanks Clay
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)