Billsteins with 5 notches.... 5" coleman collars......
????
most said 10" on http://www.914world.com/bbs2/index.php?act=ST&f=2&t=42137&hl=springs
but a few use 8"
will they work? can the 5" perch sit high enough on the Bilstein to have useful adjustment?
i have a line on afco coil springs.....8"
I got 8"s right now and it works. It'll get you about 4" clearance on the bumpstops on 22" tires. Go about an inch from the bottom of the collar and you'll be about right at the bump stops.
These are on koni sports though.
Found a good place for qa1 coils. I think the site is cheperformance.com
QUOTE (sj914 @ Dec 5 2005, 12:16 PM) |
I got 8"s right now and it works. It'll get you about 4" clearance on the bumpstops on 22" tires. Go about an inch from the bottom of the collar and you'll be about right at the bump stops. These are on koni sports though. |
QUOTE (sj914 @ Dec 5 2005, 12:17 PM) |
Found a good place for qa1 coils. I think the site is cheperformance.com |
How far can you compress a 8" spring before it coil binds?
Bob
QUOTE (BIGKAT_83 @ Dec 5 2005, 12:32 PM) |
How far can you compress a 8" spring before it coil binds? Bob |
soo... i have these
and my perches
have the seating notch about .5" from the bottom....
so, if these were to sit on the top notch of the bilstein strut.... they would be ok with an 8" spring?
WAG they will work......
making purchase......
If it's at all useful(yeah I know they're not bilsteins). Here's some pics of it as low as it will go while just touching the bumpstops. The collars are about 6.5" from the bottom of the shock mounts.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)