Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Where can I get Dellorto carb parts?

Posted by: Kevins911 Dec 6 2005, 09:12 PM

I need to rebuild my DRLA 36's, the only place I have found is CB Performance but they were going to charge me $40 for shipping, kinda' high for a package that would weigh less than 5lbs.

Thanks
Kevin

Posted by: sean_v8_914 Dec 6 2005, 10:42 PM

negotiate for a slower, cheaper method of freight. I have dealt with CB many times. they are your Dellorto source. 40 bucks to ship the carbs there or to ship the kits?

Posted by: eds72 Dec 6 2005, 10:50 PM

CB would be my recommendation. You also may want to call European Motorworks in Hawthorne, Ca. 310-644-8038.

Posted by: MarkV Dec 7 2005, 01:12 AM

I recently bought new vents, idle/main jets & rebuild kits from a guy that has an Ebay store in Italy. The prices & shipping are way better than CB. His name is Gabrielle.

http://cgi.ebay.com/ebaymotors/DELLORTO-DRLA-40-36-CARBS-REBUILD-KIT_W0QQcmdZViewItemQQcategoryZ33551QQitemZ7982672800QQrdZ1QQsspagenameZWD1V


Attached image(s)
Attached Image

Posted by: bottomend Dec 7 2005, 04:04 AM

I've purchased from Gabrial before. He's honest and his prices are fair.

Posted by: jasons Dec 7 2005, 08:24 AM

I thought there was a guy Hector or Javier? at European Motorworks that could pull all kinds of stuff out of thin air.

My buddy bought some carbs from that guy Gabrial on ebay and he was very happy with the deal.

Posted by: rhodyguy Dec 7 2005, 10:15 AM

you might try Air Cooled Engineering. 1-801-943-1234. www.aircooledengineering.com.

k

Posted by: morphenspectra Dec 7 2005, 10:25 AM

Gabrial is da man i get ALL my carbs & carb parts from him.i highly recomend him for anything dellorto you may need.
james
appearance & performance

Posted by: tat2dphreak Dec 7 2005, 10:35 AM

I bought my rebuild parts from aircooled.net... John is a good guy.

Posted by: Kevins911 Dec 7 2005, 06:07 PM

Thanks for all the replies and info, I will definatley try these places out.

Thanks
Kevin

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)