Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Weber Carbs

Posted by: shelby/914 Dec 18 2005, 10:37 PM

A friend sent a pair home with me to put in the parts washer to clean up. They came off a 2.0L. I have looked them over and other than, made in Italy and Weber I see no part number or other identifying marks except a 76 with a degree symbol on the butterfly. Sorry no pix as old camera is not talking to the new computer. Where do I look for a model or size indicator?

Posted by: Aaron Cox Dec 18 2005, 11:32 PM

2 carbs...

do they have 2 butterflies each?

or a single barrel each?

if 2 bbl, weber IDF IDA or DCNF
if 1 bbl ICT

measure the bore on them

40? 44? 48? IDF

34? ICT

Posted by: lapuwali Dec 18 2005, 11:35 PM

There may be some very faint stamped marks on the body. It's most likely they're IDFs. Measure the throttle plate diameter and it will tell you if they're 40s or 44s. Post a pic and one of us can ID them, most likely.