I got these hubs off EBAY guy said they are from a 914. Here is all the markings.
I won these before I got the sturts and hubs from SLITS. I just want to know what they are for sure so I can relist them.
Attached image(s)
More marks
Attached image(s)
side view
Attached image(s)
and he said these go to them but they are rears
Attached image(s)
911 front hubs.
don't know if they are early or late style.
I would guess early, but can't remember the exact way of telling. (different bearing and cap I believe)
a very unlikely, long shot... but once I heard about someone that had a set of them that were modified with an insert to make them fit onto a 914... Not likely, but check the bearing race before you sell them as a 911 part.
I think from 50 to 100$ for the pair is the going rate.
brant
QUOTE (spare time toys @ Dec 19 2005, 04:17 PM) |
and he said these go to them but they are rears |
These rears had to be on the back of the car they came off of because you could see the markings left from the parking brake.
QUOTE (brant @ Dec 19 2005, 04:50 PM) |
911 front hubs. don't know if they are early or late style. I would guess early, but can't remember the exact way of telling. (different bearing and cap I believe) a very unlikely, long shot... but once I heard about someone that had a set of them that were modified with an insert to make them fit onto a 914... Not likely, but check the bearing race before you sell them as a 911 part. I think from 50 to 100$ for the pair is the going rate. brant |
QUOTE (Aaron Cox @ Dec 19 2005, 07:17 PM) |
911 hubs on a 914 strut |
I'm really not sure what model the rear rotors come from. I don't recall the tapered hat. Solid rotor could mean early 911 (T) or 912. I'd have to guess from the 1960's.
So how much for the hubs Larry?
QUOTE (9146986 @ Dec 20 2005, 02:18 PM) |
So how much for the hubs Larry? |
See my ID 911 hubs thread. I have the 1967 to 1973 dash three vented rotor hubs.
QUOTE (spare time toys @ Dec 20 2005, 11:51 AM) |
I paid a total of $58.00 for all of it hubs and rotors shipped to my door. Gotta love EBAY low ball bids. |
I Am holding off selling them untill I get the front end here from SLITS then Im going to see what will work with what I have and sell the rest.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)