Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 1970 911 & 197X 914 any common parts?

Posted by: itsa914 Dec 19 2005, 08:52 PM

I have a line on a 1970 911 roller (read real cheap) that I just can't pass up So what parts are common between this 911 and any 914/4 or /6? I know the front suspension is a bolt on to a 914 anything else?

Now the roller is just that, no motor, trans, glass, most of the interior is gone.

Posted by: type47 Dec 19 2005, 08:55 PM

hood badge?

Posted by: Joe Ricard Dec 20 2005, 08:05 AM

5 lug and vented front brakes?
Wiring harness for spare correct colored wire and switches connectors.
Good fenders are good for resale as is anything else left over.

Posted by: Bleyseng Dec 20 2005, 08:18 AM

still a 901 tranny isn't it?

gauges swap over
wheels swap over

Posted by: 9146986 Dec 20 2005, 09:28 AM

Engine lid latch is the same

Front a-arms are 914.

The early 901 trans is desireable for some 6 converters, but you have to flip the ring and pinion. IIRC vintage racers may also be interested in the trans.

Posted by: Aaron Cox Dec 20 2005, 10:34 AM

without the trans.... (some gud gears....)

its just a 911 front end with a whole lotta crap that ya gotta throw away later....

Posted by: Phoenix-MN Dec 20 2005, 11:21 AM

911 emergency/parking brake assembly, vented rotors and larger rear calipers.

Posted by: 914Sixer Dec 20 2005, 01:37 PM

The rear hubs are good for 5 bolt rear conversion if you use 6 stub axels. The relay board has a round unavailable tach balast for the 6 relay board. The 3 pin cdi box if it is any good works for 6's.