Well, if Sherryl gets the green light from her doctor on Friday, she'll be leaving for London, England on Sat. with her sister and mom......
so, that leaves me free to goof around for an entire week
Hopefully I can avoid sitting in front of the TV too much and actually get my lazy butt out to the garage and be productive.....
me too... finish reassembly....and some motorwork....
I need to pull a bunch of parts from the roller, and clean up the garage. The back half has a layer of black powder from powdercoating, and there are tools everywhere.
If I can I also want to do my oil pan modification for the Subaru engine. I have all of next week off, so I should have some time to get stuff done.
-Tony
4 DAYS OFF THIS WEEKEND,
I'll be fabbing up a support for a folding tow hook system for my teener.
Have a MERRY CHRISTMAS!Ya'll
Yeah I said it.
Ron
I finished stripping the underside of the drivers side on my teener this last Sunday, this coming week, I'll be primering that area, and spraying it with the Body Schutz.
Merry Christmas
Mike,
The surface grinder project is progressing but not done so I haven't had time to work on your knife yet. I did, however, find something cool to play with that I'm sending you in the mail today. Watch for a 6x9 padded yellow mailer.
-Ben M.
I get to take the interior out of "das boat" to dry out the 2 inches of water sitting in it. I made the mistake of leaving the car out in the rain and it filled up.
At least I can look at the seat mounting up close and figure out how to lower the seats.
i'm hoping McMark doesn't have any friends either and will be at his shop on sat. as i missed him last weekend and i'd like to get started on my engine conversion ...
Andy
3 maybe 4 days of no work. Not sure about Friday. Was planning on devoting at least a couple of days trying to sort out the car but my son calls me last night and wants me to help him replace his clutch and throw-out bearing.
Any words of wisdom on doing a clutch job on a '01 Mustang GT???
Maybe you can box up some parts
Did you get my PM?
QUOTE (Headrage @ Dec 20 2005, 02:14 PM) |
Any words of wisdom on doing a clutch job on a '01 Mustang GT??? |
i'm going to be trying to get my d-jet on my car, or the l-jet....i'll have fuel injection going in other words.....
i also will have to fix my stubborn oil leak...oh and the transmission leak.
does anybody have an extra tranny fill plug i can borrow for a while....mine`s not tapered and so it leaks.....
b
if we know you Mike, you'll end up deciding to re-sign something and it will put you back another 3 months...
have a good one, brother!
QUOTE (Mueller @ Dec 20 2005, 09:59 AM) |
so, that leaves me free to goof around for an entire week |
Next Tues-Thursday are full-on house and 914 project days....touch-up painting to seal from rain, slueth and fix drainage problems, and general clean-up FOR BOTH HOUSE AND CAR
More specific for my 914 are to grind away drivers floorpan rust to find good metal for welding new pan, hook-up heater blower fan and new tubing, fix headlights that stopped working after this last rain (the new H4s were awesome, then it all went dark one day ), install Engman trunk release, hopefully CAMP914 trunk shocks (SANTA?), fix drivers door handle, fix wiggling throttle pedal, install drivers door pocket, new power door lock kit, alarm (maybe), and Alpine CD player from my previous car.
I'd really appreciate getting 0.02 cents about my car from someone besides the mechanic and might be PMing people in my East Bay CA area- drive over, bring beer and wrenches, see what happens!
QUOTE (neo914-6 @ Dec 20 2005, 01:02 PM) | ||
Don't forget the 27th! OC to TC... |
QUOTE (Mueller @ Dec 20 2005, 01:32 PM) | ||||
have you confirmed this date with Tony? I'll be a little miffed if he has no room for it |
Lets see...
-Finish rocker arm setup and assembly.
-Put on all the newly powder coated sheet metal
-Cherry pick the good FI bits and pieces from my boxes o' parts
-Put the D-Jet onto the motor
I think that's puhlenty for this weekend...
After that, it gets fun...
- oh yeah, finish running the wiring for the tow lights...
-Josh2
I'm leaving friday with the wife, daughter, mom and dad for a long weekend away from home
No internet, no 914s...
Lessee if I'll survive
well, I asked for an "all in one cutting system", so the day i get back, im going to start cutting out rusty metal, and cutting good metal from the donor car... and then i need to drop the engine, finish stripping the car, fab support braces, get the car to the media blaster... get the other teener running ... that will take most of my christmas break... and more... probably extending into january... but that is the list
Install flares and megasquirt.
John
Ordered new door panels and speaker ports from morphenspectra.
They shipped today!
T
Mike,
Number one::
Spend your time and figure out an off the shelf replacement cv joint/axle combination that requires no machining...
Think sand rail and the parts that are already out there...
I cant believe that will all the front wheel drive cars out there that there is no simple cv joint replacement off the shelf that will work...
Number two::
Figure out an affordable way to build a nice free flow exhaust for the type IV...
Im talking pipes and a flowmast, or two cherry bombs...
Number Three::
Figure out the audi tranny or the boxster tranny...I want the boxster with the finger paddles...firgure out the issues and make a kit
Number Four::
Find me a high CFM 2.5" diameter 12 volt powered fan that can be put inline in the heater tubes in the front
trunk
Four A:; Find some insulated flexible 2.5" tubing for the heater to replace the paper tubing.
Number Five:
Design a emailable, printable pattern for under the fender flexible fender liners and a good way to attach them without wrecking the existing paint..
Number six:
Find the detailed specs of the car that is rumored to be running 2.4 liter with DJet...the car is in CA somewhere...I want details...what cam especially, and what kind of hp is he making..
That should keep you busy for a few days.
Rich
Many project beginning this week,
I have 2 weeks off, I love the auto industry!
1 Install Brad Mayeur's clamshells
2. Install the new $275 renegade style radiator
3. Relocate fuel pump
4. New 12 inches longer Terry Cable
5. Front swaybar
6. Start artwork for 914 poster
7. New autocross springs/shocks on my wife's Cabby
8. Find the squeak on her e-class
9. Finish my kitchen remodeling job I started last year.
That is in order of priority
Mark
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)