Is there anyway to figure out what pound rating a set of rear springs are? The ones I'm looking at are thicker than stock by quite a bit, they are painted yellow. Just wondering.
coil spring rate:
CODE |
lbs/in = 1.500.000 x d^4 ------------------------ n * D^3 |
or just put some weight on them and measure the compression
Put one on a bathroom scale and add enough weight to compress it one inch - read the scale.
Ken
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)