I just put a set of Konis on the rear of my 73 2.0L. The old shocks had no bump rubbers so I installed the Konis the same way. I'm now wondering if I might have problems with the shocks bottoming out. Do 914s need bump rubbers on the rear shocks?
QUOTE (billd @ Dec 28 2005, 12:31 PM) |
I just put a set of Konis on the rear of my 73 2.0L. The old shocks had no bump rubbers so I installed the Konis the same way. I'm now wondering if I might have problems with the shocks bottoming out. Do 914s need bump rubbers on the rear shocks? |
That said, I think you will find that a lot of guys don't have them, mostly because they looked for some new ones when the old ones turned to dust and they couldn't find anything suitable, or Porsche wanted $60.00 for one replacement I am sure there are lots of options that would work and will save you from buying another set of Koni's. Let us know what you figure out.
Use them... use them... use them.
They are available from many race shops.
For example: http://www.paragon-products.com/product_p/koni-70.34.95.htm
Anyone have suggestions on a source for these? Auto Atlanta lists them as NLA. Pelican says "availability may vary" and quotes a price of $64.15 each. Paragon has front bump rubbers for a reasonable price, but not rears.
Can the front rubbers be used on the rear struts?
http://www.paragon-products.com/product_p/koni-70.34.53.htm
Paragon lists them for 13.95 for the rears. Too expensive? =P
Thanks, some how I missed that on my search of their site.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)