Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Local Place for alignment

Posted by: drive-ability Jan 11 2006, 04:39 PM

I really don't know where to take my 914 to get an alignment for street use. Is there a shop around Orange county Ca. anyone would recommend? It's a V-8 car with a 930 trans.

user posted image

Posted by: Aaron Cox Jan 11 2006, 04:55 PM

if you can make the drive to riverside, there is a guy that most of the Riverside PCA use...

otherwise
Hergesheimer (sp?) in lake forest...

Posted by: xitspd Jan 11 2006, 04:57 PM

ohmy.gif Call Steve Aven at 714-637-1234! Located in Orange, California.

Posted by: SLITS Jan 11 2006, 05:11 PM

Bud's Tire & Wheel.....Riverside, CA......Manny is the alignment king on Teeners.

Posted by: Aaron Cox Jan 11 2006, 05:12 PM

QUOTE (SLITS @ Jan 11 2006, 04:11 PM)
Bud's Tire & Wheel.....Riverside, CA......Manny is the alignment king on Teeners.

thats who i was referring to.... biggrin.gif

Posted by: SLITS Jan 11 2006, 05:13 PM

Yeh...but like all engineers you leave the salient parts out!

Posted by: Aaron Cox Jan 11 2006, 05:16 PM

QUOTE (SLITS @ Jan 11 2006, 04:13 PM)
Yeh...but like all engineers you leave the salient parts out!

i had to look up salient... laugh.gif
http://dictionary.reference.com/search?q=salient

Posted by: SLITS Jan 11 2006, 05:21 PM

I hope you chose #2...........Joe College... smilie_pokal.gif

Posted by: drive-ability Jan 11 2006, 06:16 PM

Thanks guys,
the shops I went to just look at the car and began spilling out excuses for why they couldn't work on it.
I admit its a bit of a load to drive but I always drive it on the equipment and road test the car for them..
Thanks again!
user posted image

Posted by: bmunday Jan 11 2006, 07:10 PM

QUOTE (Aaron Cox @ Jan 11 2006, 03:16 PM)
QUOTE (SLITS @ Jan 11 2006, 04:13 PM)
Yeh...but like all engineers you leave the salient parts out!

i had to look up salient... laugh.gif
http://dictionary.reference.com/search?q=salient

sa·li·ent ( P ) Pronunciation Key (sl-nt, slynt)
adj.
Projecting or jutting beyond a line or surface; protruding.
Strikingly conspicuous; prominent. See Synonyms at noticeable.



Springing; jumping: salient tree toads. WTF.gif


Posted by: Markeydoo Jan 11 2006, 07:24 PM

If you find a good shop that does alignment in O.C. please post it.
Thanks
Mark

Posted by: jim_hoyland Jan 11 2006, 08:08 PM

I use Grand Prix on Newport Blvd. There's a guy there who knows 914's.949-645-7022
Used to go to Ray Steven's place- near 16th and Placentia. A porsche garage.He's in the phone book

Posted by: kdfoust Jan 11 2006, 09:34 PM

I use:
Clark's House Of Suspension
26901 Vista Ter, Lake Forest, CA 92630
(949) 768-6261

The guy's good and is totally familiar with p-cars. He's done both of mine to my specs. It is worth noting that he no longer has a big collection of rear alignment shims for 914s so take your own (Zims in Texas has them). He also does not turn a knuckle-headed high school drop out lose on your car. There's a good chance he'll do the work himself. He also keeps appointments and works on time.

Later,
Kevin

Posted by: jim_hoyland Jan 11 2006, 09:37 PM

Does clark do suspension upgrades and lowering too?

Posted by: xitspd Jan 11 2006, 09:42 PM

ohmy.gif Steve's uses Accurate Alignment in Orange, California. He has had my cars (914-6) done there with very favorable results. smilie_pokal.gif

Posted by: kdfoust Jan 11 2006, 09:49 PM

QUOTE (jim_hoyland @ Jan 11 2006, 07:37 PM)
Does clark do suspension upgrades and lowering too?

I don't know I've never asked. I do that stuff DIY.

Posted by: Headrage Jan 11 2006, 10:25 PM

How long should a good all wheel alignment take if it's done by someone who knows the car?

Is it a drop off in the morning and come back at 5 or could you wait for it?

Posted by: Aaron Cox Jan 11 2006, 10:29 PM

QUOTE (Headrage @ Jan 11 2006, 09:25 PM)
How long should a good all wheel alignment take if it's done by someone who knows the car?

Is it a drop off in the morning and come back at 5 or could you wait for it?

an hour

i brought in the specs....
manny put it up on the rack....

shims etc....

done
AA

Posted by: Steve Jan 11 2006, 10:34 PM

Hergesheimers did a 4 wheel alignment and corner balance on my car before I sold it.
It made a world of diference in the cornering.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)