Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Heater Blower Motor Wires

Posted by: bd1308 Jan 11 2006, 06:00 PM

from my inspectionary skillz, I cant find any wires that arent connected on the main harness that would appear to connect to my heater blower motor....

74 914.

b

Posted by: redshift Jan 11 2006, 06:02 PM

I cut all mine. I went wireless.

Uhh... Relay #3? hot wire is.. hmm..




M

Posted by: bd1308 Jan 11 2006, 06:06 PM

thanks miles i can always count on you to provide a bump laugh.gif

b

Posted by: bd1308 Jan 11 2006, 06:10 PM

miles, how's wireless power working out for you?


Posted by: SLITS Jan 11 2006, 06:57 PM

Main harness...under relay board....harness to tail lights.....yellow and green wires

Posted by: bd1308 Jan 11 2006, 07:00 PM

i'll check on that...thanks ron.

b

Posted by: ChrisNPDrider Jan 11 2006, 07:06 PM

I found mine recently - buried down in the area by the fuel intake for FI, look for pencil wide black housing surrounding the yellow and green, there is a wide clear plastic connector at the end of mine where the two leads slip into.

I still haven't finished trouble shooting why the blower doesn't turn on, but I stillhave the heater handle out cleaning all the rust and grime built up on the contacts and hinge-doubt there was any current able to go through allthat crud.

Good luck!
wink.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)