Idle was set to 1,000 when warm. Whenever I'm slowing down, like when you come to a stop light, the idle hangs at about 1,600. If I release the clutch slightly while stopped, the idle drops right back to 1,000.
My mechanic thinks its the air flow sensor. The AAR has been replaced, all hoses are attached; and, the car runs fine otherwise.
What causes the idle to hang ? Is there an easy fix ? or id further inspection required ?
Any help will be appreciated,
Jim
check to make sure your clutch cableis not wrapped around the accel cable right at the front of the tunnel...it happens..ask me how I know...
You come to a stop light, push in the clutch and the revs go up...
let it out and they go down....hhmmmm
Or vacuum leak.
Rich
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)