OK, I should know this but I don't or maybe I forgot. What is different between a 1.7 / 1.8 muffler bracket and 2.0L one?
1.7/.8's dont hang as low due to the HE's kicking upward.....
Ok, I guess my question should have been how do you tell if a bracket is for a 1.7 or 2.0 when its not on a car?
QUOTE (itsa914 @ Jan 23 2006, 12:43 PM) |
Ok, I guess my question should have been how do you tell if a bracket is for a 1.7 or 2.0 when its not on a car? |
http://www.914world.com/bbs2/index.php?act=ST&f=4&t=12704
2.0 looks like this.
Jim
So to tell the difference look where the bracket mates up with the muffler flange. If the end is open then 2.0 but if not then 1.7 /1.8 yes?
the 75 style are wider and are short like a 1.7 style....
a 1.7 is short
a 2.0 is tall.....
hard to show differences without pics...
i'll call and put a request for the camera to come home tonight. i have a 1.7/1.8, a 2.0 and the 75/76' style. i'll put them all in one shot if no one beats me to it.
k
QUOTE (rhodyguy @ Jan 23 2006, 01:14 PM) |
i'll call and put a request for the camera to come home tonight. i have a 1.7/1.8, a 2.0 and the 75/76' style. i'll put them all in one shot if no one beats me to it. k |
sun is shinning like crazy. i think i'll go for a drive a fetch it. not to be confused with fulch it. see ya.
k
QUOTE (rhodyguy @ Jan 23 2006, 12:20 PM) |
sun is shinning like crazy. i think i'll go for a drive a fetch it. not to be confused with fulch it. see ya. k |
AHh...
cause I sold a "2.0" bracket cause it didnt fit on my car, but it didnt look like a 2.0 bracket, guess it was a 75 bracket or somethun.
b
I have a later 2 liter style that I didnt know was later until I tried to install the muffler I just bought!
Anybody want to buy a brand new late style hanger? Never used, slight hammer marks from frustration!
Back when I designed my replacement 73-74 2.0 bracket, I looked at doing a 1.7 - it is really different than the 2.0 - it has a form back on each side that is then formed parallel to the base at the ends. Each end sits at a different height and length from the base. Made this a tough part to form due to the geometry. I would have had to make a holding die set to do it right. The arms out on the 1.7 are also thinner than the 2.0. The 73-74 2.0 lies flat, the 1.7 does not.
M
well, i'm sitting in a room with a bunch of 3rd graders. waiting to figure out how to post a picture in the sandbox that i've always been timed out on. have to convert it from a word doc to jpg i think.
k
a digital camera turned it into a .doc?
see new thread. it might be handy to have in some place where it doesn't get lost in the shuffle. i saved the picture (in the sandbox) as it came to me. doc form. total size was something like 9.5 megs. and i was trying to post it with dial-up .
k
probably TIFF format.
why did it have a .DOC extension?
wierd.
b
Yeah, Britt, Kevin is WEIRD! HA!
Sometimes it is just that easy!
why?...ok. it was posted at the yahoo group for the marysville high school class of 71', by a classmate of mine that works for the USGS. he posted it. it also had some text. my wife saved it on her computer. she uses it in her class when they are studying dissasters. the titanic is a portion of that thematic study section. she wrote her masters on the use of thematic study as an educational tool. that picture was taken by the driver that was rigging the berg so it could be towed off course as it was headed for a offshore drilling rig.
k
QUOTE (dinomium @ Jan 23 2006, 05:40 PM) |
Yeah, Britt, Kevin is WEIRD! |
when the going gets weird, the weird get stranger. i miss you hunter s.
k
QUOTE (rhodyguy @ Jan 23 2006, 07:11 PM) |
when the going gets weird, the weird get stranger. i miss you hunter s. k |
superriffic!!
k
QUOTE (rhodyguy @ Jan 23 2006, 03:07 PM) |
see new thread. it might be handy to have in some place where it doesn't get lost in the shuffle. k |
clean one Britt
rusty 1.7
i think
30.00 both shipped, help Britt
Attached image(s)
i still feel bad about that. sorry.
b
QUOTE (rhodyguy @ Jan 23 2006, 06:11 PM) |
when the going gets weird, the weird get stranger. i miss you hunter s. k |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)