Got new Corbeau Classic ll's for the car. Ordered them from motorsportseats.com. Great price and they arrived two days later Definately worth a call if you are looking for seats.
Attached image(s)
they mount to the 914 seat slides....a little wiggle with the drill might be needed
Attached image(s)
Now, for anyone that has Corbeau seats, how are you supposed to mount the sliders to the adapter bars. The holes on the adapter bars don't line up with the other set of holes in seat, so you can't bolt them directly in. My only other guess was to sandwich the bolt head between the bottom of the seat and bar and use the nylock nuts - but that doesn't seem right. Totally confused right now
Attached image(s)
QUOTE (d914 @ Jan 28 2006, 08:21 AM) |
they mount to the 914 seat slides....a little wiggle with the drill might be needed |
like he said
I had the same issue with a different Corbeau seat years ago -- their "914 adapter" doesn't fit and doesn't seem to actually be for 914's! I just bolted the rails directly to the bottom of the seat as mentioned above.
There is a do it your selfer for this on the pelican site.
http://www.pelicanparts.com/techarticles/914_seat_install/914_seat_install3.htm
I had the same problem, I got rid of the rails all together, because my father and I are the only ones that drive my car. I fabricated a solid frame and bolted the seats to the floor. It is also kind of a track car so this was safer anyways. I used square tubing and the mounter adapter bars. If you use the seats with your original rails you might find you sit up way to high. just a fyi. I like the seats you got though!!!
Attached image(s)
Ahhh...the Pelican site. Should have thought to check there. Thanks guys, can't wait to get them installed.
QUOTE (Steve @ Jan 28 2006, 08:47 AM) |
There is a do it your selfer for this on the pelican site. http://www.pelicanparts.com/techarticles/914_seat_install/914_seat_install3.htm |
So what did you pay for em? Their site only quotes MSRP.
I plan to get those, but I am just going to bolt them to the floor.
do they fit the backpad???
QUOTE (jasons @ Jan 28 2006, 02:55 PM) |
So what did you pay for em? Their site only quotes MSRP. I plan to get those, but I am just going to bolt them to the floor. |
And here they are installed. Man the second seat sure went a lot quicker than the first. What a PITA the first one was. Partially my fault for not centering one of the holes I had to drill.
Not to crazy about how it looks with the brown backpad. May replace it with a thin piece of wood covered in black. A project for another day...
Attached image(s)
QUOTE (jgara962 @ Jan 28 2006, 03:52 PM) | ||
They were $179 each. |
QUOTE (jasons @ Jan 28 2006, 03:57 PM) | ||||
$179 + shipping? |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)