I bought a 1975 914 2.0 and just found out about this sight. I am having a problem with getting my timing set properly. i change the points cap and router and now i am having nothing but problems getting it timed. i only have a TDC mark on the fan. I measured out where 27 deg BTDC would be and tryed to set to it, but here is what is happening.
it starts and runs fine, i can take off from stop at a normal speet and it sounds good, but if i really try to get on it (like we all know that is how it wants to be treated), it starts to knock and sounds like the engins is about to crack.
i have tryed to time it all different ways, before 27 deg after 27 deg, i have not played with the vaccume system yet, but all was running fine before i changed stuff around, so i dont thing i would have a problem with the vaccume system since i did not change any thing there. Any ides????
Welcome to the Garage.The timing on your car is very important. As you look at the top of the fan it is rotating from the right side of the car to the left. The 27* timing mark comes up first.
You need to set the points first, adjusting the points changes the timing.
If you want to talk to me PM me and I'll give you my phone number.
:PERMAGRIN: Joe
Attached image(s)
Oh Yea!!! Come to HOOTERS to night at 7:00. Most of the Slow Cal people will be there. It's is just off Harbor at the 405.
:PERMAGRIN: Joe
Welcome. You didn't mention anything about setting it to 27 degrees before TDC at 3500 RPM. If you're setting it at 27 while the engine is not running you're getting huge advance! Also, set the timing with the vacuum advance hose pulled off the distributor and plugged.
If you can safely drive the car to the HOOTERS event, DO IT! Someone there will show you how to do it.
Thanks Mark
:PERMAGRIN: Joe
I wonder how long before he comes back? Always entertains me since the 914Club is so amazingly fast at responding. It takes awhile for people to to realize they only have to wait 10 minutes.
QUOTE (McMark @ Jan 29 2006, 12:34 PM) |
I wonder how long before he comes back? Always entertains me since the 914Club is so amazingly fast at responding. It takes awhile for people to to realize they only have to wait 10 minutes. |
sorry i was amazed how many people responed and i am still trying to navigate the sight. thanks for the info. i will try to get to hooters tonight, like i said the fan only has a TDC mark on it. and yes i removed the hoses from the distributer and timed it at 3500 rpm.
thanks to all for the warm welcome, i am going to go try out some of your suggestions. see you at Hooters tonight.
Post somes pics of your ride too.
as soon as i figure it out i will get some pics up.
http://www.914world.com/bbs2/index.php?act=SF&f=16&PHPSESSID=9b01dd1e8ac68df0bd2b9c3cbfedd765
Welcome aboard!
I have relatives in Tustin.
There's lots of So Cal help near you.
KT
"F#@king A" nothing like a little 100mph therapy!!!! with just a few tips from you guys my car is timed in and running smooth. thanks for the advice, there were some marks on the front side of the fan and i was timing of of them. i was way off!!
See you all at Hooters tonight.
Dave
Kool!!! Glad to hear your rocking...
See you tonight.
:PERMAGRIN: Joe
Welcome!
Sorry, but My hooter wont be there tonight. But, glad u got it running better.
Now, go have some fun!
You SoCal people with all your "Fun" and "Get-to-gethers."
Are you going to cut up a rust free tub? You know, just cause you can?
Zach
How much does this place RAWK?!?!!
I hope to see some pix!
QUOTE (Vacca Rabite @ Jan 29 2006, 06:45 PM) |
You SoCal people with all your "Fun" and "Get-to-gethers." Are you going to cut up a rust free tub? You know, just cause you can? Zach |
Sk8erBri.... This place is the best!
QUOTE (Vacca Rabite @ Jan 29 2006, 06:45 PM) |
You SoCal people with all your "Fun" and "Get-to-gethers." Are you going to cut up a rust free tub? You know, just cause you can? Zach |
Brian,
I'm glad you made it tonight. I think you'll see the socal group is a pretty close knit group of guys (and gals). Your car has a lot of potential, so we'll do our best to steer you in the wrong direction
I'll try to stop by tomorrow after work. I cant make a commitment though... we're getting ready for some big stuff at the shop and they'll probably have me working late.
Let me be the first to say.........
just a few
Yeah I know, 944s... but there were only 2 914s and both were adios when the camera came out. The PP 944 SoCal Grüppe showed as well.
Yeah..
I had a great time meeting you bro...!!!! And your woman was very kewl...!!
Meeting the 944 contingent was a blast... Those guys are just like us.
Cheap bastards with a willingness to geterdone...
Dam good time...
Kinda missed Aaron.
.. And Lagunero...
And most of all... Slits... Cause it just ain't right widout da Slits.
Thanks for buying me dinner Scott...
And lets all get to Joes for some more BBQ and good times.
Twystd1
Hey Zach,
We get Hershey swap meet, though
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)