Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Floorpan Rust

Posted by: mcbain77 Feb 13 2006, 01:39 PM

So i have been working on getting my interior fixed and have found several places where the pans have rusted through. The areas are relatively small and have some pinhole rust. I can always go the welding route, but since the areas are small and if treated propertly with Metal Ready and POR15, I was thinking I could just use some epoxy putty to take care of the problem. There doesn't seem to be any structural damage and the areas are really small.

Does anyone think this is a viable solution?

Posted by: mcbain77 Feb 13 2006, 01:43 PM

FYI - POR15 site shows a floorpan restoration kit -
http://www.por15.com/PRODUCTS/COMPLETEKITS/FLOORPANTRUNKREPAIR/tabid/105/Default.aspx

Posted by: tat2dphreak Feb 13 2006, 02:00 PM

I wouldn't if you can, weld it up... then por-15...