Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ JOEs BBQ
Posted by: TROJANMAN Feb 14 2006, 01:53 PM
seems we have a lot of people selling and looking for parts in the other thread, so i thought we could start a separate thread to address those needs. 
given the fact that most of so cal will be there, i would think many parts could be bought, traded, and sold.
i need droplinks and hardware for my weltmeister front swaybar 
anyone?
oh ya, and where are the norcal folks? 
Posted by: bmunday Feb 14 2006, 02:21 PM
Greg, I need a rear trunk lid, think you can fit one of those in the overhead on the plane? I owe you a beer, c-ya Saturday..
Joe tells me he has one, but not sure of the condition... I'm sure it's better then the one I have now..
Posted by: Howard Feb 14 2006, 02:50 PM
I'll trade * for a future draft pick.
Posted by: TROJANMAN Feb 14 2006, 02:52 PM
| QUOTE (Howard @ Feb 14 2006, 12:50 PM) |
| I'll trade * for a future draft pick. |
usually an * means "see below"
so after looking below, i would gladly trade you a future draft pick for suzy
Posted by: Howard Feb 14 2006, 03:01 PM
| QUOTE (TROJANMAN @ Feb 14 2006, 12:52 PM) | ||
usually an * means "see below" so after looking below, i would gladly trade you a furutre draft pick for suzy |
Good try, rubberboy. The offer is still on. *
Other acceptable trades:
D cell batteries
Kaopectate
Nascar stickers
47 Buick hood ornament
Stuckey's pecan roll
* in SoCal speak = Mike Z.
Posted by: MW 914 Feb 14 2006, 03:03 PM
Well shit Greg...my conversion just got really easy. Would one of you guys bring a low mileage 3.2 that runs perfect? Thanks!
I would be willing to discuss engines other than a 3.2 on a case by case basis. I figure I should have this wrapped up in a few days. 
Posted by: TROJANMAN Feb 14 2006, 03:07 PM
weren't you the one asking for a jack in the other thread?
jackass
mike, have you thought about a suby conversion? 
Posted by: 914-8 Feb 14 2006, 03:12 PM
I have a rear trunk lid that I'll be getting rid of soon (probably next couple of weeks).
It is in good condition. It did have some holes drilled in it at one point that have been filled. It is standard L041 black, is in good enough shape to use as it is.
I'll let it go cheap!
Posted by: MW 914 Feb 14 2006, 03:16 PM
| QUOTE (TROJANMAN @ Feb 14 2006, 01:07 PM) |
| mike, have you thought about a suby conversion? |
Yes, I have my eye on a pristine motor that just came out of a 1977 Subaru Brat.
Posted by: Flat VW Feb 14 2006, 03:20 PM
| QUOTE (MW 914 @ Feb 14 2006, 02:03 PM) |
| Well shit Greg...my conversion just got really easy. Would one of you guys bring a low mileage 3.2 that runs perfect? Thanks! I would be willing to discuss engines other than a 3.2 on a case by case basis. I figure I should have this wrapped up in a few days. |
Put me down for a Tangerine Evo header, no heat exchangers, complete phase II kit please, ceramic coated, color does not matter, I'm not picky.
On a more serious note I could use some #1 condition exterior door handles...
John
Posted by: MW 914 Feb 14 2006, 05:05 PM
On a serious note...I could use some visors.
Posted by: Gint Feb 14 2006, 05:54 PM
I need all of the heater tubes for the passenger side under the motor from the exchangers to the bulkhead. 1.8 if it makes a difference, but I don't think it does.
I need 4, 17, 22, 25, 26 and 9 (flapper box). And the mounting bolts for same of course.
Attached image(s)
Posted by: TonyAKAVW Feb 14 2006, 05:57 PM
I have some flapper boxes, I'll bring them by. I have to be in San Diego by 3, so I'll be there earlyish.
Also have a set of visors. Not in CW condition, but useable.
-Tony
Posted by: Aaron Cox Feb 14 2006, 06:05 PM
i need teh three rear targa trim pieces.... the chrome ones...
Posted by: MW 914 Feb 14 2006, 06:06 PM
| QUOTE (TonyAKAVW @ Feb 14 2006, 03:57 PM) |
| Also have a set of visors. Not in CW condition, but useable. -Tony |
I'll take a look at them if you don't mind. My car is far from CW.
Posted by: TonyAKAVW Feb 14 2006, 06:38 PM
Aaron: I have some. I am not sure I have a complete set, but i'll take a look.
-Tony
Posted by: Aaron Cox Feb 14 2006, 06:45 PM
| QUOTE (TonyAKAVW @ Feb 14 2006, 05:38 PM) |
| Aaron: I have some. I am not sure I have a complete set, but i'll take a look. -Tony |
wicked!
Posted by: d7n7master Feb 14 2006, 06:53 PM
Joe's BBQ/Swapmeet? 
2 cool -
So I should consider bringing my used 2.0, 3 stud heads 4/sale or trade?
Posted by: sixnotfour Feb 16 2006, 06:34 PM
| QUOTE |
| Well shit Greg...my conversion just got really easy. Would one of you guys bring a low mileage 3.2 that runs perfect? Thanks! I would be willing to discuss engines other than a 3.2 on a case by case basis. I figure I should have this wrapped up in a few days. |
There is 1 3.2 -6 on pelican parts , other 2 are sold
http://forums.pelicanparts.com/showthread.php?s=&threadid=266665
Posted by: TROJANMAN Feb 16 2006, 06:49 PM
hey mike, were you nappin on the job? 
anyone have droplinks for a front weltmeister and stock rear sway bar?
Posted by: MW 914 Feb 16 2006, 07:42 PM
| QUOTE (sixnotfour @ Feb 16 2006, 04:34 PM) |
| There is 1 3.2 -6 on pelican parts , other 2 are sold http://forums.pelicanparts.com/showthread.php?s=&threadid=266665 |
Check the thread on PP. I have been talking to the seller about it already.
Thanks to LVSteveH in Vegas for the tip yesterday. The seller claims I am first in line on it right now pending leakdown #'s.
Posted by: Flat VW Feb 16 2006, 07:43 PM
| QUOTE (Flat VW @ Feb 14 2006, 02:20 PM) | ||
Put me down for a Tangerine Evo header, no heat exchangers, complete phase II kit please, ceramic coated, color does not matter, I'm not picky. On a more serious note I could use some #1 condition exterior door handles... John |
Posted by: KaptKaos Feb 16 2006, 07:51 PM
I'll trade some beer for some wisdom and experience. My 1.7 is not running too well and I could use a hand with sorting it out.
Posted by: SLITS Feb 16 2006, 07:54 PM
| QUOTE (KaptKaos @ Feb 16 2006, 06:51 PM) |
| I'll trade some beer for some wisdom and experience. My 1.7 is not running too well and I could use a hand with sorting it out. |
Frome the SoCal Contingent...you are a dreamer
Posted by: KaptKaos Feb 16 2006, 08:27 PM
| QUOTE (SLITS @ Feb 16 2006, 05:54 PM) | ||
Frome the SoCal Contingent...you are a dreamer |
Well I wasn't asking YOU!
Posted by: cbenitah Feb 16 2006, 08:28 PM
I'm coming up running on 3 strong cylinders.. who knows, I may even try that 4th on the ride home..
Posted by: Mugs914 Feb 16 2006, 08:40 PM
Anyone got one of these spoilers they wanna get rid of?
...Cheap? 
...Um, Reasonable?
...Why is everyone laughing?
Attached image(s)
Posted by: TROJANMAN Feb 16 2006, 08:44 PM
looking for a spare throttle cable too. (just in case)
and a fuel filter 
Posted by: Gint Feb 16 2006, 09:00 PM
| QUOTE (SLITS @ Feb 16 2006, 06:54 PM) | ||
Frome the SoCal Contingent...you are a dreamer |
Aw come on now. If I get enough beer I get real wise.
Posted by: MW 914 Feb 16 2006, 09:01 PM
| QUOTE (Gint @ Feb 16 2006, 07:00 PM) |
| Aw come on now. If I get enough beer I get real wise. |
This could be a whole mass of brain power. I happen to know for a fact that I am the smartest guy I know when I am drunk.
Posted by: Aaron Cox Feb 16 2006, 09:19 PM
mike PM sent
Posted by: Headrage Feb 16 2006, 09:31 PM
| QUOTE (Aaron Cox @ Feb 16 2006, 07:19 PM) |
| mike PM sent |
I hope the weather holds out...
Posted by: Gint Feb 16 2006, 09:35 PM
| QUOTE (Headrage @ Feb 16 2006, 08:31 PM) | ||
I hope the weather holds out... |
Don't wuss out on me now. I want to meet you. I've met a lot of the SoCal gang, but never you Allan.
Actually that goes for the rest of you spoiled Californians too.
I'll be there, rain or shine.
Posted by: brant Feb 16 2006, 09:44 PM
don't forget little ole me...
I'm looking for a 150mph speedo please
brant
Posted by: Howard Feb 16 2006, 10:21 PM
I was bringing one promised to some dork in Colorado. Wanna out bid him?
Posted by: Gint Feb 16 2006, 10:21 PM
| QUOTE (brant @ Feb 16 2006, 08:44 PM) |
| don't forget little ole me... I'm looking for a 150mph speedo please brant |
Are you coming with us Brant?!?!
Posted by: SLITS Feb 16 2006, 10:44 PM
| QUOTE (Gint @ Feb 16 2006, 09:21 PM) | ||
Are you coming with us Brant?!?! |
Oh shit....there goes the neighborhood
Who's lap is he gonna ride on
Posted by: Aaron Cox Feb 16 2006, 10:45 PM
| QUOTE (SLITS @ Feb 16 2006, 09:44 PM) | ||||
Oh shit....there goes the neighborhood Who's lap is he gonna ride on |
he's bringing alpha too
Posted by: SLITS Feb 16 2006, 10:51 PM
| QUOTE (Aaron Cox @ Feb 16 2006, 09:45 PM) | ||||||
he's bringing alpha too |
Alpha? Is he the new CGBC member you've been boasting about?
I suppose this means the Reverender Jesse "Rump Rider" Jackson is accompanying the Colorado "Brokeback Mountain Contingent" too.
Posted by: Gint Feb 16 2006, 10:55 PM
We can't compete with the SCGBC.
Don't ferget the heater parts SLITSY? I gotta keep Greg's tootsies warm.
Posted by: SLITS Feb 16 2006, 10:58 PM
| QUOTE (Gint @ Feb 16 2006, 09:55 PM) |
| We can't compete with the SCGBC. Don't ferget the heater parts SLITSY? I gotta keep Greg's tootsies warm. |
That line would be just to easy...........
Posted by: Gint Feb 16 2006, 11:00 PM
| QUOTE (SLITS @ Feb 16 2006, 09:58 PM) | ||
That line would be just to easy........... |
It was a freebie...
Posted by: SLITS Feb 16 2006, 11:08 PM
| QUOTE (Gint @ Feb 16 2006, 10:00 PM) | ||||
It was a freebie... |
Sir, Yes Sir....all heater "tootsie parts" have been located and acquired, except for the barrel nut...Sir
You'll need a two outlet (early) blower or spliter and the hose to connect to the pass side "j" tube to keep his tootsies warm unless you are going to rely upon the engine cooling impeller.
Posted by: Aaron Cox Feb 16 2006, 11:08 PM
ron, your late on your membership dues
Posted by: brant Feb 16 2006, 11:08 PM
I guess I'm the dork...
gint,
only coming with in spirit...
nobody riding anywhere on my lap thou....
brant
Posted by: SLITS Feb 16 2006, 11:09 PM
| QUOTE (Aaron Cox @ Feb 16 2006, 10:08 PM) |
| ron, your late on your membership dues |
Purse your lips and..........
Posted by: TonyAKAVW Feb 17 2006, 12:17 AM
I've got a couple blowers, I think one has the splitter and hoses. Should I bring them?
-Tony
Posted by: Flat VW Feb 17 2006, 12:31 AM
| QUOTE (TonyAKAVW @ Feb 16 2006, 11:17 PM) |
| I've got a couple blowers, I think one has the splitter and hoses. Should I bring them? -Tony |
Yes, and bring Jes, too.
John
P.S. Or just forget that other crap, and bring Jes.
Posted by: Gint Feb 17 2006, 06:33 AM
| QUOTE (TonyAKAVW @ Feb 16 2006, 11:17 PM) |
| I've got a couple blowers, I think one has the splitter and hoses. Should I bring them? -Tony |
Please do. The blower motor is not a show stopper though. We'll be highway cruisin all the way so there'll be plenty of heat. But I'll need one eventually anyway, so yes, please do. Thanks.
Posted by: Toast Feb 17 2006, 07:46 AM
| QUOTE (TROJANMAN @ Feb 16 2006, 06:44 PM) |
| looking for a spare throttle cable too. (just in case) and a fuel filter |
Posted by: Aaron Cox Feb 17 2006, 01:26 PM
| QUOTE (Toast @ Feb 17 2006, 06:46 AM) | ||
|
Posted by: Krimee Ariver Feb 17 2006, 01:33 PM
| QUOTE (Aaron Cox @ Feb 16 2006, 08:45 PM) |
| he's bringing alpha too |
Posted by: SLITS Feb 17 2006, 01:44 PM
Here we go....another one 
Posted by: VegasRacer Feb 17 2006, 01:54 PM
Ron. Ol' buddy, old pal. . . . .
I need a jack to store in a '73 trunk.
Posted by: SLITS Feb 17 2006, 02:46 PM
| QUOTE (VegasRacer @ Feb 17 2006, 12:54 PM) |
| Ron. Ol' buddy, old pal. . . . . I need a jack to store in a '73 trunk. |
You can have the early style or late style and if you really want to be stylin', I bring one of those aluminum scissor types outta the fake water cooled Porscheeeeeees.
Posted by: VegasRacer Feb 17 2006, 02:58 PM
That would be bitchin' dude. 
Posted by: lagunero Feb 17 2006, 07:09 PM
I've got a pair of newly recovered black vinyl seats (top pads are perforated vinyl). If someone's looking for a pair of nice seats PM me.
Posted by: cbenitah Feb 17 2006, 07:10 PM
I'll bring my f/g flares! after X beers someone gotta be able to help me
haha
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)