Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Weber Carb Shop in Chicago

Posted by: roundboy914 Feb 16 2006, 06:28 PM

Last year, at the end of the season, one of my Weber's blew out a plug (i think for the float). Does anyone know of a good shop in Chicago that works on old weber carbs? 44 IDF's

Posted by: roundboy914 Feb 17 2006, 10:22 AM

bump

Posted by: tat2dphreak Feb 17 2006, 10:29 AM

rebuild it with a kit from aircooled.net... they have new floats too...

Posted by: ChicagoChris Feb 17 2006, 12:47 PM

I say order the kit from aircooled. I havent run into anyone yet worth a when it comes to Webers. I know a few places to get parts but not to work on them. You could also try MoFoCo. for parts. Rebuilding a carb is tedious but not espcially hard if you are careful.

Posted by: morgan Feb 17 2006, 08:50 PM

If you can't find anyone in the windy city give me a call in milwaukee. we rebuild a lot of carbs for british many are webers 414 690 3261

John

Posted by: Jake Raby Feb 18 2006, 10:38 AM

Any rebuild kit will NOT have internal plugs in the kit.

Send that carb to Art Thraen at Aircooled Engineering in Salt Lake city. Guess work done, and his prices are VERY good.

Posted by: Eric_Shea Feb 18 2006, 10:48 AM

Just so we're clear... there's a couple aircooled's here in SLC

http://www.aircooledengineering.com/index.php?pg=home is the one Jake's referring to.

Posted by: roundboy914 Feb 20 2006, 05:01 PM

that's what i am talking about. thanks for the replies, i will let you know what pans out.