Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Header Coatings What? Who? How much?

Posted by: Eddie914 Feb 20 2006, 04:10 PM

The 3.2 for the 914 is nearing completion!

I hate to put the rusty Bursch headers on the shiny new(er) engine.

What are the options for coatings? Pros? Cons? Who in the Seattle area? How much?

Is high heat paint a waste of time?

Posted by: Joe Ricard Feb 20 2006, 04:15 PM

Search "Jet Hot". You can usually find an authorized dealor near by.
Not sure what coating Chris did on My Tangerine but it is standing up well for the month I have run it. about 650 hard miles.

Yes Hi-temp paint is a WASTE OF TIME.

Posted by: rdauenhauer Feb 20 2006, 04:18 PM

Eddie, Performance Coating in Kent.
Decent $ excelent quality I used thier Cerma-Chrome
on my HEs and all piping. The owners a racer as well!

Posted by: alpha434 Feb 20 2006, 04:18 PM

Tech Line Coatings. Look for their dealer locator. http://www.techlinecoatings.com/Retail.htm

They are good. Ask for a catalog, too. That way you'll know what to get.

Posted by: grantsfo Feb 20 2006, 04:25 PM

I'm using POR 20 on my MSDS headers - WOnt know how it works for another month.

Posted by: Eddie914 Feb 20 2006, 04:37 PM

Rich,

Thanks

How much $$$ to do the HEs?

Eddie

Going to the 4 hour enduro at Pacific Raceways on 03/12/06? I'll be working as crew on a 911 Carerra RS team.

Posted by: rdauenhauer Feb 20 2006, 05:10 PM

Ill have to dig out the recipt (yes I keep all that shite )