Does any body know where I can get a set of plugs for the air injection ports on the heads for a 2.7?
Or what size they are?
I need em quick!!!
They are a 10 x 1.0
Performance products is suppose to carry them but they don't answer the phone.
QUOTE (Headrage @ Feb 22 2006, 03:30 PM) |
They are a 10 x 1.0 |
Pelican sells hex head Rear Brake port bolts which work well if you can get the damn air injectors out without snapping them off.
I don't know how much they are, but they fit and have a sealing ring with them.
EBS
Okay, I got them on the way. Unfortunately they will not get here until Friday so I looks like it'll be next week before the car is ready.
And yes, EBS was the place.
Thanks Cap'n and JP...
They can be installed with the engine in the car. BTDT, LOTS of times. However, a week's time is pretty unrealistic to assemble and install a 911 engine unless EVERYTHING goes right. How often does THAT happen?
I used the plugs suggested (and provided) by sixnotfour.
1/8 pipe allen plug. Works fine. I'd make it easy on myself and go to the ACE Hardware man.
Edit: hey, where did his posts go?
QUOTE (Cap'n Krusty @ Feb 22 2006, 04:16 PM) |
However, a week's time is pretty unrealistic to assemble and install a 911 engine unless EVERYTHING goes right. How often does THAT happen? |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)