These are going to be cool:
Attached image(s)
QUOTE (Series9 @ Feb 27 2006, 12:06 PM) |
These are going to be cool: |
Those are pretty cool I'd like to see a finished product!
QUOTE (turboman808 @ Feb 27 2006, 12:22 PM) |
Those are pretty cool I'd like to see a finished product! |
show the backside....
Cool! were did they come from?
Bottom line
How fast will it make the car?
They're lighter then the stock assembly, right?
QUOTE (Aaron Cox @ Feb 27 2006, 11:28 AM) |
show the backside.... |
For Aaron
Attached image(s)
QUOTE (Series9 @ Feb 27 2006, 03:02 PM) |
For Aaron |
Will they be body color or black or Oympic Blue and sent to The New New Jersey?
What does one do for reversing lights with this setup? Are there some nicer roundies that have the reversing lights built in?? (IIRC - the Elise ones have the reversing lights in the middle or something)....
get those bad boys wrapped in a CF layer
body color would be bad ass on joes ride
Is this the first prototype?
Or is there a thread showing these already installed?
Rich
I want !! were do I buy? very cool!
I think these are the first production set.
They're $300 from MikeS. ar_concepts@hotmail.com.
(818) 470-5700
These are going to be satin black and I don't have a back-up light arrangement anyway. They are available with a white light though.
How will you seal them to car so water doesnt get behind them?
EEk gawds. 300?
They look nice and all... but i'll pass....
I inquired in the original thread about reverse lights and they are available. Link below,last page has a listing of available color combos. I am probably going to be running a 3 light setup on my car when I get around to it
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=28653&hl=914r&st=100
QUOTE (Loser_Cruiser @ Feb 27 2006, 05:54 PM) |
How will you seal them to car so water doesnt get behind them? |
so cool! are there any other photos of these taillights on the web? very interested! I would like to see the three lighter or at least a set on a car. come on I need something! please? I'm all excited and have nothing too drool over!
Wow, they look great, but $300?
I guess I will have to put that on the back burner for now.
I want to build a 914-4 version of a 911R and those tail lights would fit right in. That will be my next project.
Maybe later.
QUOTE (Dan (Almaden Valley) @ Feb 27 2006, 11:26 PM) |
Wow, they look great, but $300? I guess I will have to put that on the back burner for now. I want to build a 914-4 version of a 911R and those tail lights would fit right in. That will be my next project. Maybe later. |
QUOTE (Aaron Cox @ Feb 27 2006, 11:54 PM) |
1 new rear euro lens is 185 bucks... a new housing is liek another 100? |
Update: I just spent about an hour doing a test-fit on the RS. Let's just say the housings will require considerable 'refinement' to fit properly.
To be fair, I can't guarantee the RS meets any factory standard in the tail light openings after all these years. The left housing is going to take significantly less work than the right.
On the right housing, I had to use the Dremel to even get it to go in the opening and it ended up being so thin in a couple of places that holes have developed.
Don't look for pictures for a few days. I have a lot going on and a day of fiberglass work wasn't really on the list.
I can say that they'll look right when I'm finished with them.
Standby.
QUOTE (Series9 @ Feb 28 2006, 09:17 AM) |
Update: I just spent about an hour doing a test-fit on the RS. Let's just say the housings will require considerable 'refinement' to fit properly. To be fair, I can't guarantee the RS meets any factory standard in the tail light openings after all these years. The left housing is going to take significantly less work than the right. On the right housing, I had to use the Dremel to even get it to go in the opening and it ended up being so thin in a couple of places that holes have developed. Don't look for pictures for a few days. I have a lot going on and a day of fiberglass work wasn't really on the list. I can say that they'll look right when I'm finished with them. Standby. |
I have three sets of R lites but have not advertised because they did not come with the studs for mounting them. I have asked Mark to send me a set that will work. Hopefully I will get some. More later.
CCLINRLITES
QUOTE (boxstr @ Feb 28 2006, 10:11 AM) |
I have three sets of R lites but have not advertised because they did not come with the studs for mounting them. I have asked Mark to send me a set that will work. Hopefully I will get some. More later. CCLINRLITES |
I got back on it this afternoon.
Here's the first installed picture on any 914:
Attached image(s)
More... More!!
Show us the money pic!!!
QUOTE (Andyrew @ Feb 28 2006, 04:56 PM) |
More... More!! Show us the money pic!!! |
it needs a third light...
looks great on your ride Joe!
do a CF layer to match the decklids...
AA
QUOTE (Aaron Cox @ Feb 28 2006, 04:46 PM) |
it needs a third light... looks great on your ride Joe! do a CF layer to match the decklids... AA |
I think the arrangement for reverse lights is still a two-light system.
QUOTE (Series9 @ Feb 28 2006, 05:23 PM) |
I think the arrangement for reverse lights is still a two-light system. |
QUOTE (scotty b @ Feb 28 2006, 06:39 PM) | ||
It is . It's a 50/50 split red and white just like the red/amber light. I thought a red outer with a clear center would look better Like the 308/328 Ferraris Probably make the car faster too |
Misunderstanding now understood!! What I'm thinking of, and I think Aaron as well, is a setup with 3 seperate units. Outer light being for the turn and ?? center being parking and brake and the insdie light being for the reverse and ?? (?? = parking or brake)
QUOTE (scotty b @ Feb 28 2006, 07:08 PM) |
Misunderstanding now understood!! What I'm thinking of, and I think Aaron as well, is a setup with 3 seperate units. Outer light being for the turn and ?? center being parking and brake and the insdie light being for the reverse and ?? (?? = parking or brake) |
Like this only...............different
Attached image(s)
just makes better use of the space....
looks good regardless
QUOTE (scotty b @ Feb 28 2006, 07:12 PM) |
Like this only.... |
QUOTE (Series9 @ Feb 28 2006, 09:06 PM) | ||
...salty....for Aaron...... |
QUOTE |
just makes better use of the space.... |
Finished. I have about five hours of labor in them, but they look great:
Attached image(s)
Very Cool!!!!
Me too...........
Attached image(s)
Looks great nice work!! tooks some liberties with your photo... heres 3 lights
Someone asked about my wheels. 993, 17 x 7", w 205's The rear lip is pinched, thats all, still room for more.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)