Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ replacing trans. endcap/cover

Posted by: 75boxster Mar 12 2006, 01:53 PM

I basically know very little about the 5-speed in my 75. What I do know is one of the ears
that are used to mount the tranny to chasis has broken.

I have what I belive to be a replacement cover. Is this just a R&R
deal or is there some hidden issues to swaping this piece that will
suprise me when I start?

Thanks guys. Tried a couple of searches but I am probably just calling this
piece by the wrong name.

Chris-

Posted by: itsaporsche914 Mar 12 2006, 06:43 PM

where did my post go ?

Posted by: itsaporsche914 Mar 12 2006, 06:46 PM

ill try again . i have the same problem as you chris . i think it can be replaced easily. im gonna try when i get the part. my mechanic said 3 hrs and 250.00 i tried to post pix of mine . didnt work . i will keep trying good luck let me know what happens

Posted by: So.Cal.914 Mar 12 2006, 06:54 PM

I changed the first /reverse gear in my trans, the easy part was the tail cover. I sudjest you replace the gasket.

Posted by: itsaporsche914 Mar 12 2006, 07:02 PM

chris does this look familiar?

Attached image(s)

Posted by: Dave_Darling Mar 12 2006, 07:18 PM

New gasket, new O-ring for the speedo drive shaft. I forget if there's anything else you do to seal up the speedo drive or not. Support the trans securely when you unbolt the old tail cover.

--DD

Posted by: 75boxster Mar 12 2006, 09:07 PM

That looks exactly like what happened to mine.
It also took out the front motor cross bar so the
whole frickin motor on the drivers side is on the gound.

I am really begining to hate this car.