Printable Version of Topic

Posted by: jflash914 Mar 13 2006, 08:53 PM

Has anyone experienced any problems with the 914-6 oil tank made by Patrick Motorsport. This is the one that fits in the left rear fender well. We are experiencing a small leak where the oil filter meets the machined flange. It seems the rubber seal touches the top area of the flange and doesn't make contact with the lower area until the filter is all the way tight.

Thanks,
Jack

Posted by: 9146986 Mar 13 2006, 09:11 PM

I had about a 25% leak rate with the cast aluminum tanks. If they are the ones made by Velios, eBay the boat anchor and get one of the new ones from GPR.

Posted by: john rogers Mar 13 2006, 10:11 PM

If you bought it from Jim I'd imagine he would make it right.

Posted by: Racing916 Mar 14 2006, 07:00 AM