Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Reverse Backup Switch

Posted by: Above82 Mar 19 2006, 06:53 AM

Is there a way to remove the wire harness from the engine tin where the reverse backup switch goes through? I removed the backup switch from the transmission but the casing for it is too big to fit through the hole. Does it come apart????

Thanks!

Posted by: ejm Mar 19 2006, 07:00 AM

The wiring for the switch has "bullet" type connectors, slide back the boot if there is one and carefully pull the wires from the switch.