I just won this on ebay so hopefully it was represented well enough. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8046945123&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1 I plan on it being a rpject of course but it looked straight enough and i have been looking for tub for a lil while and i feel i got a good price. I pick it up on saturday. tell me what you think.
Post pics when you get it.
You bought a front bumper and it came with a free car, sweet
After a few hours of wrestling with the stupid car we got it on the trailer. We basically jacked it up backed the trailer under it. but it was done in increments. THe guy who owned the car said that it was his daily drier about 2 yrs ago. It looks like he started tinkering and didnt know what he was doin and ended up ruining a nice car. It fram is very solid but its cosmetically hurting.
Attached image(s)
drivers side hell hole
Attached image(s)
passenger side hell hole
Attached image(s)
more pictures later i need to finiish some homework.
Rescue! Rescue! You're a true humanitarium. Bet the wife just loves it.
Marc
well in my dads case the wife hates it. In my case the mom hates it too. its at my grandpas house until i get rid og a parts bug in a couple weeks at the big portland swap meet hopefully.
Izzat fiber glass in teh passenger hell hole?
I tapped and prodded witha screw driver and it felt and sounded like metal. Will double check when I get a chance to go to my grandpas house. One question. The engine that came with the car was origanlly a 2 liter. he had it rebuilt like 2000 miles ago and said he used 96mm pistons instead of 94 mm. What does the dispacement measue now with stock rods and crank? also he seemed to think it could still run with the origanl F.I. is this true? would it run any better than stock or worse? thanks.
Attached image(s)
drivers side floor solid just starting to rust because he left it outside with windows down
Attached image(s)
I think that when you slap a set of 96's on a 2.0 you get a 2056 which will run with the D-Jet with a little tunning as long as it's a stock cam. If the cam is changed all bets are off. Looks like a steal to me !
Eric
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)