Where do you get yours?
Is magnetic better than the vinyl type as far as staying on?
Hi Chris,
Since my car is track only...I just keep the vinyl on fulltime...the place I got mine is Yak Graphics.
http://www.yakgraphics.com
They make magnetics as well.
They seem to be reasonable on prices...
Bill
This fellow made my #'s ask for George.
http://www.fastmeatballs.com/
I got mine here: http://www.edecals.com/raceg/scca.htm
Heh... I just went to the local plastics outlet place (Tap Plastics) and got raw magnetic sheet. Then bought some vinyl numbers of the appropriate size and put them on the sheet. That gives me a sort-of-rectangular "meatball" with the numbers already on it.
--DD
I got mine from the same guy that TimT used.
They look nice and he gives you directions for removal.
Never removed 'em though.
If one of you wants the magnetic stock to mount the #'s.
I have the old ones from my car lemme know you address and Ill ship them out for free!!!
they have my old # on them but you could peel them off and apply your #
cover postage perhaps?
Cool! Ill PM you.
Here is mine.
I made it with word, got it printed on a clear vinyl sticker sheet. Then i bought some white magnetic sheets and sticked the clear vinyl on it. I finally cut the outter line making an oval meatball out of it. Did a 3 day DE with them and the never flew off (i did put a bit of white electical tape on the front of the meatball just in case). Cost was under 20$ cdn of material for 2 meatballs.
HTH
Marc-André
Attached image(s)
Wow, that looks very nice. Any chance you would be willing to share your design?
Sure,
send me an e-mail and i'll send you the word document.
si2t3m @ clic.net (remove the spaces)
Marc-André
I am looking for a set of REAL sticky Pegasus, not magnetic.
Anyone?
(seems better than the Type R stickers)
M
George has some at Kennedy Fabrications.
Look at TimT's link. Follow the links on the page and you'll see Pegasus stickers.
or go http://www.georgegrenier.com/
I gave up on mag numbers. I had a well-used set from SoloTime, and recently one side flew-off on the track at 85mph even though I had the edges taped with racer's tape. Over a few years the magnetism faded I guess; and it was >100° that day so the tape didn't adhere very well. OOPS! Also the material was pretty thick and on cold mornings it would be stiff and not want to lay flat until it warmed up. (I would have to let them sit on the top of the car in the sun for a while.)
The vinyl graphics look WAY better too, IMHO. I went the semi-permanent route and just leave them on the car now.
Hey Chris,
Did you ever get the new #'s on your car?
Got any pics?
cheers,
Jeroen
And did you know that Bondo is not magnetic?
It use to be that I couldn't find a place on my car that they'd stick to.
Paul
Chris,
Got another link?
OOPS... http://www.racecarletters.com/
It is actually a company called "Brockman Signs".
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)