Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ If I pull this out.....

Posted by: jr91472 Mar 25 2006, 07:32 PM

I am referring to the plug at the bottom of the intermediate plate that holds the stack of springs and balls for the shift forks.

I have noticed that a small droplet forms on it every day or so and I am thinking maybe a small bit of gasket sealer would do the trick.

The tranny is NOT due for an oil change so.....

I think I know the answer....

later

Posted by: SirAndy Mar 25 2006, 08:20 PM

QUOTE (jr91472 @ Mar 25 2006, 05:32 PM)
I think I know the answer....

if it leaks from there ...

Posted by: bondo Mar 25 2006, 11:56 PM

Yes, but it will be slow... won't come pouring out but you'lll want to act pretty quick. It should have a copper sealing washer.. did you try just tightening it a little more? It shouldn't NEED sealant.