so I had to run out to Corona to pickup some streamline tubing for my rear wing uprights on Saturday, so I thought kill 3 birds with one stone - swing by the chassis shop in Orange to see the progress and take some pics, head out to Corona and get the tubing, then go out to Fontana for a couple of hours to spectate at the CFOS.
91 freeway is a joke - at least the "freeway" part. NO such thing as free moving traffic in SoCal anymore. Where the fro are all of these people going at 2pm on a Saturday anyway! I left Orange and traveled 13 miles - took 40 minutes on the freeway. So, for those out there that aren't familiar with how bad traffic can be - this isn't LA and the fabled 405. Nope - SEVEN freaking lanes of crawling traffic.
Needless to say, by the time I got to Aircraft Spruce, I just turned around and headed back home. Interstate 15 doesn't get any better, so I figured another 20 miles of driving and it would have been 5pm - party over and I would be just pulling up to the gate.
Attached image(s)
you can see my house in that pic!!!!!
91 and green river..,,.,,
were ya going to joor brothers?
check the speedo - I think the "91" in 91 freeway stands for 9.1 mph.
It was a 1/2 hour already into the drive and just barely at a point to see the Liberty dam
Attached image(s)
The 91 sucketh! I can get from SD to the 91 in 50 minutes, then it takes 30 minutes to go 10 miles to Anaheim Hills.
damn Aaron - you are fast - beat my second post!
went to Aircraft Spruce just off Serfas Club road. They sell streamline tubing to make some bitchin' uprights for my wing - Roger Sheridan told me about them and that is what he used. I wanted to have a single, big tail piece like an aircraft just for look (though drag on the upright would be stupid) and then I saw Roger had the same shape but much smaller, and the two narrower uprights looked awesome IMO.
I am such a copycat...
yup. aircraft spruce is off railroad st....
next tine you need some steel, try joor brothers off smith. huge steel place....
QUOTE (Cloudbuster @ Mar 27 2006, 02:39 PM) |
The 91 sucketh! I can get from SD to the 91 in 50 minutes, then it takes 30 minutes to go 10 miles to Anaheim Hills. |
On rare occasion I would go to Corona from Redondo beach for a 7 pm meeting and it would take me two and a half hours to go 55 miles leaving at 5:00 pm.
91 sucks, and there isn't a good alternative.
-Tony
was that because of that suv on its side in the goat field by chance?
Let's see the tubing!
I dropped the tubing at the chassis shop on my way back, I am using aluminum tubing they carry, but here is a snapshot off their website for the chromoly tubing - same shape though so you get an idea of what I's talkin' 'bout.
I'll add a shot of Sheridan's car in a second - also on his website and a bit hard to make out the tubing, but you will see how he placed it. His mounting is pretty narrow (IIRC 18" between) and I am going to move it out to about 30" between - he gets some rocking on his. That moment issue is why I would have to run a big single upright and why it would drag so poorly.
Attached image(s)
Attached image(s)
1 word "fastrak".
i know how wants to pay up 8.50$ to go 12 miles, but time is also money as they say....
next time get off and take santa ana canyon down to gypsum that will save you alittle time, only on weekends though.
George
QUOTE (byndbad914 @ Mar 27 2006, 04:06 PM) |
I avoid The Green River Parkingway like the plague that it is. Go the 57 to the 60 and come back to your goal. It will be much faster.
:PERMAGRIN: Joe
Maybe everybody is headed over to Aarons house??
QUOTE (Joe Sharp @ Mar 27 2006, 03:59 PM) |
I avoid The Green River Parkingway like the plague that it is. Go the 57 to the 60 and come back to your goal. It will be much faster. :PERMAGRIN: Joe |
QUOTE (byndbad914 @ Mar 27 2006, 02:36 PM) |
check the speedo - I think the "91" in 91 freeway stands for 9.1 mph. It was a 1/2 hour already into the drive and just barely at a point to see the Liberty dam |
QUOTE (soloracer @ Mar 27 2006, 05:11 PM) | ||
Naturally you're only doing 9.1 mph......you're driving an SVT after all (Slow Vehicular Transport). |
I got a ride in a coworker's SVT and it is definitely fast. Funny thing is, he burned out his brakes at Willow Springs as well!
He also had a spark plug launch itself out of the head.
380 HP and 450 Ft-lbs of torque is fun even if it does weigh 4000+ lbs.
-Tony
QUOTE (TonyAKAVW @ Mar 27 2006, 08:36 PM) |
I got a ride in a coworker's SVT and it is definitely fast. Funny thing is, he burned out his brakes at Willow Springs as well! He also had a spark plug launch itself out of the head. 380 HP and 450 Ft-lbs of torque is fun even if it does weigh 4000+ lbs. -Tony |
I'm sorry, just don't get it. Why would anybody want to go TO Corona?
What are bitchin about???
Thats nothing....
Have ya ever had to stand around Aaron all day while he is showing his but crack to all that pass his ass?
Dude... the 91 is cake compared to that........
You couldn't know...... Unless it happened to you....
Twystd1
Aaron.... You just got MattRd........
QUOTE (Howard @ Mar 27 2006, 05:49 PM) |
I'm sorry, just don't get it. Why would anybody want to go TO Corona? :poke: |
man, you guys kill me....
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)