Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ opening the BIG can of worms

Posted by: sk8kat1 Mar 30 2006, 12:25 PM

ok may car is almost at the end of my list of to do's---

but before I put it all back together and actually get to drive it anyone have suggestions on things to do .. this is ment to be a hard driven street car no track or AX

I have as current set up --- '73 2.0L

19mm MC
bmw front brakes w/ porterfield pads
braided SS brake lines
turbo ties
koni yellows front and rear
19mm sway front
stock sway rear
140# springs
stock FI
k&N air filter
bursch exhaust
blue coil
swepco tranny fluid
bridgestone re750 195-50-15 's

...........................................................any thoughts ?

Posted by: Joseph Mills Mar 30 2006, 12:31 PM

Put some decent rubber on it. If you want something sticky and cheap, the Hankooks RS-2's look mighty good.

Once you have your ride height established, have a full alignment by competent techs. It will bring out it's best handling abilities.

Have fun. biggrin.gif

..

Posted by: Mugs914 Mar 30 2006, 12:35 PM

agree.gif agree.gif

You might also consider having it corner balanced. Not critical for a streeter, but nice to have it sitting properly.

Most of all, DRIVE IT!!! driving.gif driving.gif driving.gif

And oh yeah... Have FUN! biggrin.gif biggrin.gif

Posted by: boboli914@att.net Mar 30 2006, 01:19 PM

Put a Hemi in it! driving.gif

Posted by: sk8kat1 Mar 30 2006, 01:54 PM

idea.gif hmmm .. my friend does still have a 74 vette engine he had built for his el camino....

but its only like 400 HP ... happy11.gif biggrin.gif

Posted by: rhodyguy Mar 30 2006, 03:07 PM

those should be good street tires. go wear them out. then spring for new ones. your car is going to handle great.

oh. new K&N? don't forget to oil it.

k

Posted by: Joseph Mills Mar 30 2006, 03:15 PM

QUOTE (rhodyguy @ Mar 30 2006, 03:07 PM)
those should be  good street tires. go wear them out. then spring for new ones. your car is going to handle great.



k

agree.gif



Like he says. I didn't notice you had listed your tires. biggrin.gif


The 19mm bar will be nice. You could go to just a "little" stiffer rear springs - 120ish - might have a better balance.

..

Posted by: sk8kat1 Mar 30 2006, 03:25 PM

biggrin.gif oops sorry I have 140# springs too .. editing post

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)