i have a reason to believe they are 3"..... and they have brake options.....
someone confirm. ill post my buddy's 4 piston 4runner caliper conversion.....
My 260 looks more like ~ 3.5 CtoC.It has a 4 piston from an early 4 wheel drive Toyota pickup.Calipers made by Nissin same as the Z.Direct bolt up except for bending up a new hardline.
Ya shoudda used the Brembos from a 350Z.
The four piston Toyotas are from a 4X4....
Ok... I admit it. I own a pristine 240Z too.
The Toyota Caliper thing has been a known mod for at least 10 years.
cool... just wondering if they would fit on a 914.....
Don't make me go pull the wheel off my Z.
Hmmm... I'll go look through my boxes of parts to see if I still have some core calipers to measure.
Okay,
I dug out a set of core calipers for the 240Z this morning and checked.
3.5" bolt spacing on the mounts.
bummer, thanks for checking mike
AA
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)