I searched but could not find this info.
I'm looking for the exact length of the two brackets that support the apron, just back of the front hood opening. I took those on my car off, and I cant find them anymore Arrrgh . . .
On the driver side, it goes straight down, on the passenger, it angles to clear some fresh air ducts, I believe.
My tub is at the bodyshop and I need those brackets for the hood to be fitted correctly. If I have the length, I can make a temporary set.
And I've thrown out 3 or 4 tubs over the years, but I don't think i've ever kept those things !
Michel
both are 8.875". Taken from Liz's car.
Thank you !
I was looking for the dimension center to center (I forgot to say) I assume that's what you measured, Joe ?
TIA
Bump.
Sorry for insisting, but the bodyman called and I need to deliver the parts tomorrow.
Can anybody confirm that the 8.875 inch dimension is from center to center of the screw holes, please ?
TIA
Confirmed. I get the same numbers on both sides of Elvira.
Once again, the people on this site rock.
M
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)